Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 4 of 4

Hybrid View

  1. #1
    Join Date
    Apr 2008
    Location
    BC, Canada
    Posts
    45

    Default Homemade picket twister Horse power numbers

    I recently made a picket twister that has a 1/3 hp motor, 2" pulley on the motor, 8 3/4" pulley on the 50:1 worm gear.
    It can twist half inch solid cold square almost enough (to the shearing point).
    I didn't even try to make baskets.
    So my point is that my math tells me it takes 72.83hp to get there.
    When I get time I am going to try a 11 3/4" pulley on the worm gear and see what that can do.
    That should give me 97.7 hp at the stock.
    I'll post results.
    Just wanted to put the numbers out there.
    Thanks, Cargoon

  2. #2
    Join Date
    Feb 2007
    Location
    Near Dallas, TX
    Posts
    214

    Default

    You can't gain horsepower by going through a gearbox (you actually loose hp). What you're gaining is torque. Actually you're trading RPMs for torque.

    HP = torque * RPM / 5250

    So your 1/3HP motor at 1800RPM is generating about 1 ft-lbs of torque.
    When you go through the 50:1 gear reduction you'll change this to 50 ft-lbs of torque, but it'll only spin at 36 RPM.

    HP = 1 * 1800 / 5250 = 0.34
    HP = 50 * 36 / 5250 = 0.34

    Both of these are the same horsepower. In the real world you'll lose a whatever torque it takes to spin the gearbox so the output horsepower will be a little less.

    Dynasty200DX w/coolmate1
    MM210
    MM Vintage
    Lincoln AC225
    Victor O/A, Smith AW1A
    Cutmaster 81
    IR 2475N7.5FP
    Evolution Rage3
    Jancy USA101
    9" South Bend
    AEAD-200LE

  3. #3
    Join Date
    Apr 2008
    Location
    BC, Canada
    Posts
    45

    Default Thanks

    Ok, then my motor is putting out 1ft-lb of torque.
    So then it takes 218.75 ft-lb of torque, (Not counting what is lost in the worm gear).
    Motor with 2" pulley, worm gear with 8.75" pulley, 50:1 worm gear.
    1ft-lb(Motor) x 4.38 (pulley ratio) x 50 (Worm gear) = 219ft-lb .(Not counting loss)

    So when I put on 11.75 pulley
    1ft-lb x 5.88(New pulley ratio) x 50 = 293.75ft-lb (Not counting loss)

    Does this sound pretty close?

    I would put my torque wrench on it but I just sold my 250ft-lb. I'll see if I can borrow one from work and see how close we are.

    Thanks Andy

  4. #4
    Join Date
    Sep 2005
    Location
    Salem ,Ohio
    Posts
    3,913

    Cool

    I have a 979 lb in torque motor/gearbox on mine because i use that drive for 3 other machines and it works great...Bob
    Bob Wright, Grandson of Tee Nee Boat Trailer Founder
    Metal Master Fab Salem, Oh 44460
    Birthplace of the Silver & Deming Drill
    1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.