While setting up 212 for the first time I ran into postion jumper links question, input voltage 200 or 230? Do i need to buy a voltmeter to check?
I have 200 amp service, it has a 30 amp breaker with # 8 wire I use for my thunderbolt and plasma cutter. Will that work? I plan on installing a 40 amp breaker with #8 for the 212. Am i on the right track?
Any help would be greatly appreciated!
Results 1 to 2 of 2
09-24-2011, 10:33 AM #1Junior Member
- Join Date
- Jan 2011
212 Postion Jumper Links - input voltage?
09-24-2011, 04:04 PM #2
If this is in your residence/home shop than your service should be 230/240v if you are in the US.
#8 wire & 40 amp breaker will be fine.MM250
Lincoln ac/dc 225
MM200 black face
Whitney 30 ton hydraulic punch
Lown 1/8x 36" power roller
Arco roto-phase model M
Vectrax 7x12 band saw
Miller spectrum 875
30a spoolgun w/wc-24