Hey guys,
As some of you may already know, I'm a senior in high school and ready for graduation. And like some seniors, I haven't decided what I want to do after high school. I was thinking of goin into the oilfield and working as a roustabout or roughneck on a drilling rig, but alot of people are trying to convince me to take my welding talent and make a career out of it. There is a vo-tech in Woodward, which is 30 miles from where I currently live. The guy I work with over there lives 2 miles down the road from the school and said I could live there with him. I haven't made up my mind yet but this sounds like a good deal. What are your opinions on this?
Results 1 to 10 of 15
Thread: Future Plans
-
02-05-2008, 10:21 AM #1
Future Plans
At Home
Miller Thunderbolt XL AC/DC
Performance Tools 6" Bench Grinder
Craftsman Hand Tools
Craftsman Cordless Drills
DeWalt Angle Grinder
1976 AMC Jeep CJ7
1980 Ford F150 Custom
1994 Chevrolet Silverado C1500
At Work
Miller Bobcat 250
2 Miller MM251s
2 Miller MM252s
Miller Dialarc 250 AC/DC
Lincoln Idealarc 250 AC/DC
Snap-On Flux Core Welding Machine
Hypertherm Plasma Cutter
Victor Torches
2006 Chevrolet Silverado 2500HD 4x4
Proud American Ham KE5TJA
-
02-05-2008, 10:39 AM #2
your whole world of success will depend on how well you get along with your roomy. it's hard to study when people are loud, partying etc. If you think that end of the chapter will be ok, then I would do it. while you still can. take the opportunity ......................you won't regret it. most people can go out and make good money, but not all people can become a good qualified craftsman.
Syncro250DX Tigrunner
Victor set
Elite auto-helmet
Dewalt Bench grinder
Mastercraft miter saw
Mac air tools
Mac hand tools
Toothbrush
pencil
toilet paper
-
02-05-2008, 12:24 PM #3
Member
- Join Date
- Oct 2007
- Location
- Tennessee this week, Wyoming next week.
- Posts
- 49
Go Army. Sign up as a weldor.
The post service education benefits will send you through college.
-
02-07-2008, 10:05 AM #4
I don't think I have to worry much about Larry bein loud and partyin. He's an older guy and after we come in from the shop, he usually sacks out in his recliner, leaving me to watch TV, work on my truck, study, whatever I need to do. I've talked to a couple people from the vo-tech, as well as our school counselor, and they are getting me some applications for scholarships, grants, and the like.
I had thought of this, but prefer the way I'm goin now. However, the Navy recruiter is comin tonight to talk about sending me to welding school, I'll listen to him and then weigh my options.Go Army. Sign up as a weldor.
The post service education benefits will send you through college.At Home
Miller Thunderbolt XL AC/DC
Performance Tools 6" Bench Grinder
Craftsman Hand Tools
Craftsman Cordless Drills
DeWalt Angle Grinder
1976 AMC Jeep CJ7
1980 Ford F150 Custom
1994 Chevrolet Silverado C1500
At Work
Miller Bobcat 250
2 Miller MM251s
2 Miller MM252s
Miller Dialarc 250 AC/DC
Lincoln Idealarc 250 AC/DC
Snap-On Flux Core Welding Machine
Hypertherm Plasma Cutter
Victor Torches
2006 Chevrolet Silverado 2500HD 4x4
Proud American Ham KE5TJA
-
02-07-2008, 11:38 AM #5
Junior Member
- Join Date
- Apr 2007
- Location
- Manchester, NH
- Posts
- 28
Great Idea
Going to the vo-tech and furthering your skills is a great idea if you can swing it. You'll gain skills that will set you apart from the un-skilled labor pool, and you'll be setting yourself up on a career path that could last you the rest of your life.
I'm also betting that you'll really enjoy the classes at the vo-tech. Who wouldn't enjoy some quality time under the helmet really honing their skills? Go for it!
-
02-07-2008, 12:34 PM #6
Junior Member
- Join Date
- Feb 2008
- Posts
- 7
opinion
I have to say I agree with this man. My army time was as a recon scout which has its uses but those boys overseas could sure use a good welder. I sleep alot better knowing good craftsmen are taking care of our boys and getting more education as well as REAL WORLD experience! You dont get broke down physically like I am if your a welder while in the army, they dont have to run nearly as much as recon does...Not to mention afterwards you will always feel that warm spot that tells you you did the right thing. Nothing like standing in a crowd when someone asks for a veteran to raise their hand and seeing each hand raised, and a face attached to it. Thats when you see proud people who know that the price of freedom isnt free.
-
02-07-2008, 01:27 PM #7
what to do
Wow senior in high school, I sort of remember those days. It took me 10 years after high school to decide what I wanted to be when I grew up. Now today at 38 I can't imagine loving my job more. I only wish I had decided earlier. Now as you finish you high school life the real stuff is coming up and what a great time in life, so much is out there just waiting to be done and you have the opportunity to do it.
Sure the oilfield is good money right now even as a roustabout. I know a couple of older ones and they loved their jobs, the opportunity to travel some and work hard all come with hard partying. But let's take a look 10 to 15 years from now. How much talk is going into alternative sources of energy. Alot.
I would even say along with Steven Covey that the manufacturing jobs will become less and less as we develop new technologies and streamline our manufacturing processes. Will we always need people doing those jobs? yea I think so but not so many and it is going to be devastating for those not prepared for it. Look at how much we automate, we are even writing software that can learn.
Even forums like this are here so we can share information quickly. Who has to go find a weld instructor when you can post pictures and have others look at them on line? Is it the right way? Sometimes.
My point and sorry for being so long winded about it is to find what you like about welding and learn as much as you can cram into your head, find out what heat does to metals and how to control dilution ratios and so much more. The need for this type of information is becoming critical in our new world environment. I don't think it will be to long before we will see different types of job competition that we have never imagined, at least publicly. To get a glimpse of it dig through this and other forums to find what is happening in Canada and the gulf coast region where the competition is becoming more challenging.
We are entering an age where the flow of information and knowledge is the focus, as a society we are evolving into something else. Just like society went from hunter gatherer to farming and from farming to manufacturing. We are growing into our next evolutionary step as a society. Our world is getting smaller and we are seeing borders fading as information is transmitted around the world freely.
So take a look ahead and see where you want to be, what you want to do. The opportunities are endless and the prepared welder will be the successful welder. The jobs are there, the kicker is we have to be willing to do what it takes to get them.
I know some of this if not all of it is going to stir some controversy. I don't intend it to but even within myself as I think about it and write it my own emotions are challenged. So take it for what it is, an opinion from a point of view. One point in millions.
-
02-07-2008, 01:32 PM #8
Junior Member
- Join Date
- Feb 2008
- Posts
- 7
-
02-08-2008, 10:17 AM #9
The Navy recruiter came by last night and talked to me about welding programs in the Navy. After 2 hours of discussion, I've decided to sign on with them as a weldor, more specifically a SeaBee. I go back to Hooker on Monday to have my parents sign the papers, then go to Oklahoma City on Tuesday for my physical and paperwork on Wednesday. Provided I pass my physical, the job is guaranteed
At Home
Miller Thunderbolt XL AC/DC
Performance Tools 6" Bench Grinder
Craftsman Hand Tools
Craftsman Cordless Drills
DeWalt Angle Grinder
1976 AMC Jeep CJ7
1980 Ford F150 Custom
1994 Chevrolet Silverado C1500
At Work
Miller Bobcat 250
2 Miller MM251s
2 Miller MM252s
Miller Dialarc 250 AC/DC
Lincoln Idealarc 250 AC/DC
Snap-On Flux Core Welding Machine
Hypertherm Plasma Cutter
Victor Torches
2006 Chevrolet Silverado 2500HD 4x4
Proud American Ham KE5TJA
-
02-08-2008, 07:54 PM #10
Junior Member
- Join Date
- Feb 2008
- Posts
- 2
Congrats.
Well congratulations hope you pass your physical... I'm Graduating next year from high school.... I can't wait... I want to be a weldor I hope it works out for you in the long run


Reply With Quote










