What is Miller referering to when I see Dinse machine or Tweco machine?
Results 1 to 4 of 4
Thread: Dinse/Tweco
-
02-02-2008, 03:17 PM #1
Member
- Join Date
- Jun 2007
- Posts
- 41
Dinse/Tweco
-
02-02-2008, 03:44 PM #2
Senior Member
- Join Date
- Aug 2006
- Location
- N.C.
- Posts
- 362
The reference is to the ends of the leads / gun...not the machine...
George W. Bush was saving your butt whether you liked it or not!
Fear is temporary, regret is forever
HH210 with SG
-
02-02-2008, 03:54 PM #3
Member
- Join Date
- Jun 2007
- Posts
- 41
Thanks
Thanks-I appreciate your response
-
02-02-2008, 05:18 PM #4
Senior Member
- Join Date
- Aug 2006
- Location
- near rochester NY
- Posts
- 9,881
a dins connector locks like this (see pic.)
first pic show it with the plastic cover but pulled back a bit. 2nd pic is a closer look at the plug.
sorry the cover is off these are old pic's from a repair. but it should give you the idea. it plugs in and turns about 3/4 of a turn to tighten.
hope that helps a little bit.thanks for the help
......or..........
hope i helped
feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
JAMES
Reply With Quote
