I wonder if anybody has seen this piece and know who makes/sells it? thank you. IT's about two by two feet. I need to match a clients existing railing.
Results 1 to 6 of 6
Thread: Have You Seen This Forged Panel?
-
04-25-2011, 04:14 PM #1
Junior Member
- Join Date
- Jul 2008
- Location
- Seattle
- Posts
- 3
Have You Seen This Forged Panel?
Antonio Knoy
Knoy Metalworks
Ballard (Seattle),Wa
Miller 200DX TIG/Stick
Lincoln 175+ MIG
Hypertherm G3 60 amp Plasma Torch
Torchmate 2 4'x8' CNC table (for plasma torch)
1950 Johnson model J Horizontal Bandsaw (10"x18")
(this saw cut a 0.46mm perfect slice of 10"x12" I beam!)
-
04-25-2011, 06:28 PM #2
Senior Member
- Join Date
- Sep 2006
- Posts
- 270
That isn't King stuff. So I guess your options are: 1. become a blacksmith/artist 2. find the blacksmith artist who did it 3. find a blacksmith artist who can copy it.
-
04-26-2011, 06:03 AM #3
Senior Member
- Join Date
- Apr 2010
- Location
- Bronson, Fl
- Posts
- 168
Looks like it is one off custom. Prolly have to get an ornamental iron guy to help you fab a replacement. Doesnt really look too complex so it should be fairly easy to duplicate with a little patience, plus some forethought and malice. How many do you need to do?
Bob
-
04-26-2011, 08:53 AM #4
Senior Member
- Join Date
- Oct 2007
- Location
- Cave Creek Az
- Posts
- 796
Ditto the others. I'd be happy to make them for you, but the Seattle area is chock full of good blacksmiths. Log on to www.Iforgeiron.com and register, then post in the general section that you are looking for either the original blacksmith, or one who can make more of those panels. I guarantee success. If not, PM me and I can help you find one.
-
04-26-2011, 07:00 PM #5
Senior Member
- Join Date
- Sep 2006
- Posts
- 270
LOL
Originally Posted by Rbeckett
It might look easy if you've never done it. But if you look close the work screams skill. That was done by an artist blacksmith, not a welder.
-
04-13-2012, 08:41 PM #6
Junior Member
- Join Date
- Jul 2008
- Location
- Seattle
- Posts
- 3
Found her
Kelly Gillam, a local artist who made a bunch for this house
Antonio Knoy
Knoy Metalworks
Ballard (Seattle),Wa
Miller 200DX TIG/Stick
Lincoln 175+ MIG
Hypertherm G3 60 amp Plasma Torch
Torchmate 2 4'x8' CNC table (for plasma torch)
1950 Johnson model J Horizontal Bandsaw (10"x18")
(this saw cut a 0.46mm perfect slice of 10"x12" I beam!)
Reply With Quote
