This is a buckle I made for a customer. It's the name of his company. It is made out of 10ga. steel with a 1/8" pin for the belt latch and a 3/16" staple that the belt attaches to. I overlayed it with 22ga. german silver.
Results 1 to 5 of 5
Thread: Buckle
-
04-17-2011, 04:36 AM #1
Junior Member
- Join Date
- Sep 2010
- Posts
- 22
Buckle
V-Dot Farm
Millermatic 210 / spoolomatic 3035
Millermatic 200 / Spoolomatic 1
Miller 375 spectrum plasma
Miller Econotig
-
04-17-2011, 10:34 PM #2
Junior Member
- Join Date
- Jul 2008
- Posts
- 26
Any chance you have some photos of the back? Just curious to see the "mounting hardware" that you described.
I've done a couple of buckles, but I have always struggled with the "mounting".
Later,
Kev
-
04-17-2011, 11:44 PM #3
Senior Member
- Join Date
- Nov 2008
- Posts
- 164
Very nice!
Professional firefighter (retired). Amateur everything else I try to do...
Oh yeah: GO BIG RED!
-
04-18-2011, 08:12 AM #4
Junior Member
- Join Date
- Sep 2010
- Posts
- 22
I don't have a picture of the back of the buckle, but i am working on another on and will post the photo of the back when I'm done.
Thanks
TubbyV-Dot Farm
Millermatic 210 / spoolomatic 3035
Millermatic 200 / Spoolomatic 1
Miller 375 spectrum plasma
Miller Econotig
-
04-18-2011, 12:47 PM #5
Member
- Join Date
- Dec 2010
- Location
- Alberta, Canada
- Posts
- 42
Reply With Quote
