Hello everyone
I have a combo mini-lathe/milling and the table (whre the vise is) is too low relative to the mandrel.
Do you have examples of fixtures that I could make to rise the vise of 4-6 inches?
Results 1 to 3 of 3
Hybrid View
-
03-28-2011, 02:11 PM #1
Junior Member
- Join Date
- Jun 2008
- Location
- Montréal, Canada
- Posts
- 12
Too gap between table and mandrel
Last edited by blacksmith.450; 03-28-2011 at 04:37 PM.
sorry for my english... i'm a frenchman !
-
03-28-2011, 05:07 PM #2
Senior Member
- Join Date
- Apr 2010
- Location
- Bronson, Fl
- Posts
- 168
LMS and others sell a precision riser for abot 70-75 bucks. Already has T-slots and everything, just bolt it on, index it in and secure your material and go to work. I got mine for my 3-in-1 and have used the crap out of the mill since I have depth and a much more stable work surface now. HTH
BoB
-
03-29-2011, 05:30 AM #3
Junior Member
- Join Date
- Jun 2008
- Location
- Montréal, Canada
- Posts
- 12
Problem solved !
Thanks.
sorry for my english... i'm a frenchman !
Reply With Quote
