I was always tryin to figure out what to do with thos funnels after you used them they would drip for 20 min. So GOD came up with this as a solution after much prayer. Here's some Pictures of what I built.
Tell Me what yall think?? beats putting them in a bucket full of rags?
Results 1 to 10 of 11
-
01-16-2008, 09:22 PM #1
Member
- Join Date
- Jun 2006
- Posts
- 70
Dripping funnel?? Problem solved!!
I BLEED MILLER BLUE!
DoubleEdgeWelding@kc.rr.com
GROUNDED IN FAITH!
I have what my Big Bro JESUS has Blessed me with:
Miller 251,Miller Syncro 180,Miller 625 Plasma Cutter
Want to Buy a Miller PC-300,
Dayton 7"x12" Horiziontal Band Saw, Dewalt 14" Abrasive,& Cold Chop Saws,4' Box/Pan Brake,Also A Complete Wood Shop. Now alls I need is a bigger shop!
-
01-16-2008, 09:35 PM #2
At a gas station I worked at we would put the funnel into a 5gal bucket to drain....once it was full farmers would buy them for $5 each....I asked one of them what the **** he did with it......weeds, oil heater, and to run in his tractor that leaked more oil in a day than he could afford to put in it.....and he also added "**** for $5 the buckets worth that"
George W. Bush was saving your butt whether you liked it or not!
Fear is temporary, regret is forever
HH210 with SG
-
01-17-2008, 12:04 AM #3
How about a paper towel. If you leave your oily funnels open to shop dust etc
it just goes in with the oil next time. Clean funnels and put away properly. My $.02Nick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
2-O/A outfits
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
Propane Forge
60" X 60" router/plasma table
www.youtube.com/watch?v=jTu7wicVCmQ
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
-
01-17-2008, 07:14 AM #4
monte55
How about a paper towel. If you leave your oily funnels open to shop dust etc
it just goes in with the oil next time. Clean funnels and put away properly. My $.02
i'm with monte55 on this one. i get so much dust and cr-p flying around in the air. between welding and wood working in the shop, the funnel would be full and unusable when i went to get it.
nice storage idea though.
thanks for the help
......or..........
hope i helped
feel free to shoot me an e-mail direct i have time to chat.
james@newyorkmetalart.com
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
JAMES
-
01-17-2008, 07:04 PM #5
Member
- Join Date
- Jun 2006
- Posts
- 70
I BLEED MILLER BLUE!
DoubleEdgeWelding@kc.rr.com
GROUNDED IN FAITH!
I have what my Big Bro JESUS has Blessed me with:
Miller 251,Miller Syncro 180,Miller 625 Plasma Cutter
Want to Buy a Miller PC-300,
Dayton 7"x12" Horiziontal Band Saw, Dewalt 14" Abrasive,& Cold Chop Saws,4' Box/Pan Brake,Also A Complete Wood Shop. Now alls I need is a bigger shop!
-
01-17-2008, 07:58 PM #6
-
01-17-2008, 08:12 PM #7
Member
- Join Date
- Jun 2006
- Posts
- 70
You know thats the beauty of a GOD that is my Father. HE cares about everything I want to talk to HIM about. My daughter could call me a talk to me about anything, even the color of shoes she's going to wear that day. I love hearing her voice, Just Like my FATHER in heaven likes hearing mine. Thats the difference between a Religion & a Relationship. Religion makes feel like I'm bothering. Relationship means HE cares about everything I have to say.
I BLEED MILLER BLUE!
DoubleEdgeWelding@kc.rr.com
GROUNDED IN FAITH!
I have what my Big Bro JESUS has Blessed me with:
Miller 251,Miller Syncro 180,Miller 625 Plasma Cutter
Want to Buy a Miller PC-300,
Dayton 7"x12" Horiziontal Band Saw, Dewalt 14" Abrasive,& Cold Chop Saws,4' Box/Pan Brake,Also A Complete Wood Shop. Now alls I need is a bigger shop!
-
01-17-2008, 08:33 PM #8
Uh, dumb question, but don't they still drip? Only now they all are going to be as nasty as the top one? But good storage idea.
Tim Beeker,
T-N-J Industries
(my side bussiness)
Miller Synchrowave 350LX with tigrunner
Esab 450i with wire feeder
HH135 mig
Thermal Dynamics cutmaster 51 plasma cutter
Miller aircrafter 330 - sold
Marathon 315mm coldsaw
vertical and horizontal band saws
table saw
Dewalt cut off saw
Sand blast cabinet
lots of hand grinders
Harris torch
beer fridge
-
01-17-2008, 08:59 PM #9
-
01-18-2008, 04:02 AM #10
so your'e saying you funnel the dripping funnel, in to a funnel,that drips into a funnel,followed by a funnel that gets funneled into a funnel that drips into a cup .
........you need more funnelsLast edited by welderman23; 01-18-2008 at 04:06 AM.
my daddy always said i was IRONHEADED....
feel free to P/M me


Reply With Quote









