I have just recently started building tube frames for my 1/10th scale remote control trucks out of 1/4 inch brake line. I use a torch with mapp gas to braze the joints. Right now I'm useing Harris Saftey Silver 45% silver brazing alloy, it works great. The only problem is that it cost about $27 a troy ounce. I was wondering is anyone would know of something else I could use with mapp gas to braze my joints thats cheaper.
Results 1 to 4 of 4
03-13-2011, 07:48 PM #1Junior Member
- Join Date
- Mar 2011
03-13-2011, 07:51 PM #2
I have a small propane torch i bought more than 30 years ago that will braze. Sure wish they still have them now i would point you to one...BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.
03-14-2011, 07:33 PM #3Senior Member
- Join Date
- Mar 2006
Harris sil-phos 15% copper brazing alloy. With the same flux you are using for the silver solder, it brazes steel just fine. It's no where near as pretty as the 45% silver, though.
03-20-2011, 05:21 PM #4