Was cleaning out my dad's garage and found this welder.
It's made by Birdsell Products and it's a model # 170 stick welder. I can't find anything on Google, so I thought I'd tap the wealth of knowledge here.
If anyone can tell me anything about this welder I'd sure appreciate it!
Thanks in advance,
Brokenspur
Results 1 to 5 of 5
Thread: Has anyone ever heard of this?
Hybrid View
-
05-10-2006, 04:11 PM #1
Junior Member
- Join Date
- Feb 2006
- Posts
- 2
Has anyone ever heard of this?
-
05-12-2006, 09:26 AM #2
Senior Member
- Join Date
- Sep 2005
- Location
- Texas
- Posts
- 279
I was given one some 40+ yrs. ago, seems like it is a 180 amp AC cracker box(buzz box in some circles). This one has three amp settings on the lift/lower handle, 1/16",3/32,1/8". I asked an older fellow fabricators after I aquired it if he had ever heard of such a unit, Sam's response was it was probably a unit that was badged for Birdsell by some unknown mfg. Still have that ole thing stored under the work bench. Burned many a 3/32 and 1/8 w/this old unit.
Good luck
L*S
-
05-12-2006, 07:05 PM #3
Junior Member
- Join Date
- Feb 2006
- Posts
- 2
Thank you for the information. This thing is probably at least 40 years old too! Well, it doesn't sound like it will replace my 302 Trailblazer, so I guess I'll start me an antique welders shelf.
Thanks again!
brokenspur
-
09-26-2006, 08:33 PM #4
Junior Member
- Join Date
- Sep 2006
- Posts
- 2
Birdsell Welder
Yes I've heard of them also, they where made in California....dont remember the town. some of the early ones where made in the 20's
Originally Posted by brokenspur
-
09-26-2006, 08:36 PM #5
Junior Member
- Join Date
- Sep 2006
- Posts
- 2
Birdsell Welder
Yes I've heard of them also, they where made in California....dont remember the town. some of the early ones where made in the 20's. Would also like to buy one also. Originally Posted by brokenspur
Reply With Quote
