Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 4 of 4

Threaded View

  1. #1
    Join Date
    May 2008
    Troy, MI

    Default Meyers Snow Plow Repair

    Attached are some pictures of my latest project to repair a Meyers snow plow. As you can see in the two “before” pictures the left hand bracket broke off due to corrosion and got lost somewhere in a snow pile. The right side wasn't much better. First I cut off the corroded channel that attached to the blade of the plow. Then I skip welded 1/16” plate to the back of the blade. This section was more corroded than the rest of the blade and consequently thinner due to the higher stress from the attachment point. I replaced the corroded channel with a fabricated channel made from a piece of 1/8” x 2” flat stock and a 1/8” x 2” angle welded together. I continuously welded the fabricated channel to the new 1/16" back up plate. I fabricated a new bracket for the left side by cutting the flat section off a piece of 3/16” x 4” x 4” square tubing and then welding the two pieces together. I used a Ύ” end mill and ball nosed end mill to mill the slot in the new bracket. I got it done after my friend Guy was done with one snow storm and before the next one. It was snowing as we installed it back on his truck.
    Attached Images Attached Images

    Miller Thunderbolt
    Smith Oxyacetylene Torch
    Miller Dynasty 200DX
    Lincoln SP-250 MIG Welder
    Clausing/Coldchester 15" Lathe
    16" DuAll Saw
    15" Drill Press
    7" x 9" Swivel Head Horizontal Band Saw
    20 Ton Arbor Press
    Miller Spectrum 375 Plasma Torch

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/ on line 79

Welding Projects

Special Offers: See the latest Miller deals and promotions.