My patio table. All square tube with plasma cut inserts.
Photo 1 - Metalwork finished.
Patio table 01.JPG
Photo 2 - Shotblasted, zinc sprayed, powder coated. Plastic plugs on legs protect floor, glass mounted on rubber discs.
Patio table 02.JPG
Results 1 to 3 of 3
Thread: Patio table
-
03-04-2011, 04:40 AM #1
Junior Member
- Join Date
- Feb 2011
- Posts
- 10
Patio table
Welding is so much more than a hobby. It is a fun way to earn a living working from home.
http://www.weldathome.co.za
-
03-04-2011, 05:51 AM #2
Member
- Join Date
- Apr 2010
- Location
- Jackson, MS
- Posts
- 74
That's a pretty table. Do you have a plasma table or did you hand cut that? My plasma cutting looks like I have Parkinson's.
MillerMatic 252
Spoolmate 200
Diversion 165
Spectrum 625 X-Treme
Dayton 6" Miter Band Saw
Delta Drill Press
Bosch 10" Table Saw
Bosch 12" Double Bevel Miter Saw
Jet 5 Ton Chain Hoist
Radnor O/A
and this heavy duty table I made
-
03-04-2011, 01:15 PM #3
Junior Member
- Join Date
- Feb 2011
- Posts
- 10
I have a Torchmate 8 x 4' table, I would never attempt something this complex with handheld.
Last edited by jackjones; 03-04-2011 at 01:25 PM.
Welding is so much more than a hobby. It is a fun way to earn a living working from home.
http://www.weldathome.co.za
Reply With Quote
