does anyone have plans or ideas on how to mount and where to mount a lightbar for 2-4 offroad lights on a bronco?
Results 1 to 3 of 3
Thread: 1990 ford bronco lightbar
-
02-08-2011, 11:19 AM #1
Junior Member
- Join Date
- Feb 2011
- Posts
- 8
1990 ford bronco lightbar
-
02-10-2011, 11:17 PM #2
Senior Member
- Join Date
- Feb 2010
- Posts
- 159
my buds and i just built a offroad bumper for the 87 bronco but i should have taken some pics of it but didnt
start with cardboard cut some angles and shapes and see were it goes thats how we did ours just kinda wing it till it looked cool then did it for both sidesLeblond Makino mills
HAAS CNC SL-40 lathe
American Pacemaker lathe
wells index mill
hydrotel rebuilt
syncrowave 250
diversion 165
Miller Elite Vintage USA
-
02-11-2011, 12:06 AM #3
Senior Member
- Join Date
- Mar 2009
- Location
- Corona, CA
- Posts
- 213
Actually...yeah.
I built a trail bumper for a 1992 Bronco not too long ago. He ended up putting 3 lights on it.
http://www.millerwelds.com/resources...-a-1992-Bronco
Thats the thread with all the pictures. I can get dimensions or lay out what I did for you, if youd like.
Edit: He had the same 3 lights mounted behind a billet grill before hand, with a simple angle iron piece. Might think about something like that too.Last edited by On fire most of the time; 02-11-2011 at 12:15 AM.
Precision is only as important as the project...if you're building a rocket ship...1/64" would matter. If you're building a sledgehammer...an 1/8" probably wont.
Reply With Quote
