Has anyone here built the bending brake in the welding projects section here on millerwelds? Just wondering how it turned out and if you'd build it again.
Results 1 to 4 of 4
Thread: Bending Brake
-
03-12-2009, 06:38 PM #1
Junior Member
- Join Date
- Jun 2008
- Location
- Conklin, NY
- Posts
- 21
Bending Brake
Millermatic 180w/autoset
Spoolmate 100
Victor O & A Outfit
-
03-12-2009, 07:23 PM #2
Member
- Join Date
- Jan 2009
- Posts
- 54
look on page 13 on projects titlled < a scroll bender and brake> I built one useing his pitures. I will put pics of mine on tomorrow
-
03-13-2009, 06:25 PM #3
Senior Member
- Join Date
- Nov 2008
- Location
- Kansas City Metro
- Posts
- 387
hi PJW
Here is a link to the bender/brake that I built. I looked at a few pics from around the site and made the best with what steel that I had. Mine is a little on the heavy side
I am thinking that I want to use this bender for the sheet metal maybe up to 1/8, and build a nice press brake for making brackets and such.
http://picasaweb.google.com/keesfrie...eat=directlink
Good Luck and Please post pics when you start your build.
-
03-14-2009, 08:58 PM #4
Member
- Join Date
- Jan 2009
- Posts
- 54
Here's the pictures of the bending brake.
Reply With Quote
