My friend has this pipe notcher.
http://www.lowbucktools.com/notcher.html
Good Luck,
Bob
Results 1 to 2 of 2
Thread: Pipe Notcher
-
01-31-2011, 11:34 PM #1
Senior Member
- Join Date
- May 2010
- Location
- Central CA
- Posts
- 711
Pipe Notcher
Trailblazer 302 Air Pak w/ Wireless Remote
8-RC
Dynasty 200 DX
XMT 350 MPa w/S-74 MPa Plus
Millermatic 211
Passport Plus
30A w/ WC-24
HF-251D-1
Select Lathe
Exact Mill
Spectrum 625 X-TREME
Cutmaster 152
Kalamazoo Band Saw
SX60 Arc Station
FX30 Arc Station
8-Grinders
5-Victor O/A
4- Chop Saws
2-Drill Presses
Lincoln SA-200 Blue Tint Red Face
Lincoln SA-200 Red Face
-
02-02-2011, 02:54 PM #2
Senior Member
- Join Date
- Sep 2005
- Location
- Evansville, IN
- Posts
- 2,348
The name seems like a misnomer as the cost is higher than most of the notchers I have used. 130$ per set of dies I can buy alot of hole saws or grinder wheels. I have an old scotchman notcher at work and it still requires deburring after the dies get some age on them.
Reply With Quote
