I have a MM35, replaced the liner, torch tips, nozzle, ground cable. Problem is she wont feed the wire properly, it feeds when the cable is fully stretched out but not with a radius in it. 2nd issue is when the trigger is pulled and I am leaning on a metal object i get a pretty good shock, Ideas??
Results 1 to 3 of 3
Thread: Millermatic 35 issue
-
08-11-2012, 04:20 PM #1
Junior Member
- Join Date
- Jul 2012
- Posts
- 1
Millermatic 35 issue
Last edited by Rubiconcruiser; 08-11-2012 at 04:29 PM.
-
08-11-2012, 04:28 PM #2
Senior Member
- Join Date
- Oct 2004
- Location
- Edmonton, Alberta
- Posts
- 6,751
Worn out drive wheel, or too long of gun
-
08-11-2012, 04:39 PM #3
Senior Member
- Join Date
- Oct 2007
- Location
- Cave Creek Az
- Posts
- 796
As far as the shock goes, check your ground clamp, sound like there might be a high resistance connection, so the electric is taking the path of least resistance.
Reply With Quote
