Hello,
I bought a used plasma cutter. It seems it has two capacitors that are blown. They are the size of a "D" battery and say Phillips 1000uf and UR=300V. I am guessing this is all the information that I need to buy two replacements and solder them to the main board. I have them off of the board.
The capacitors also say 157 93075, M HP 9820:, and 25/085/56.
I was also wondering if anyone here had a schematic to tell me which terminal went to the outside of the board (the top) so I could solder the proper ones back in correctly.
Thanks for any help here.
Results 1 to 3 of 3
Thread: Spectrum 300 Cutmate help
-
01-08-2008, 09:47 PM #1
Junior Member
- Join Date
- Jan 2008
- Posts
- 13
Spectrum 300 Cutmate help
-
01-08-2008, 10:22 PM #2
Senior Member
- Join Date
- Nov 2007
- Location
- Saskatoon, Sask, Canada
- Posts
- 1,267
Can't help you with the first part of the question but you can download a manual here: http://www.millerwelds.com/service/ownersmanuals.php
Originally Posted by leon phelps
It should have the schematics you need.at home:
2012 325 Trailblazer EFI with Excel power
2007 302 Trailblazer with the Robin FOR SALE
2008 Suitcase 12RC
Spoolmatic 30A
WC-24
2009 Dynasty 200DX
2000 XMT 304
2008 Thermal Dynamics Cutmaster 52
Sold:MM130XP
Sold:MM 251
Sold:CST 280
at work:
Invision 350MP
Dynasty 350
Millermatic 350P
Retired:Shopmaster 300 with a HF-251
-
01-09-2008, 04:25 PM #3
Junior Member
- Join Date
- Jan 2008
- Posts
- 13
progress
I found the capacitors. $20 to my door. Lets hope they are all that is bad.
I am curious if anyone knows of a replacement program since Miller has admitted that these boards were made poorly? I know there is a new part number, but will Miller lower the price for a trade in with the old part?
Thanks in advance.
Reply With Quote
