I want to start learning to tig weld at home just for a hobby. I currently use a Lincoln SP-135 mig and an old Lincoln Weldan Power AC-150 stick. My main use would be mild steel and aluminum under 1/4 inch thickness. I also would like it to be portable. I've read through the spec sheets on both machines. I'm just not sure if it would be a smart move going for the more expensive machine with all the different settings or to start out with a more basic machine then work up to the high end machine.
Thank you for your assistance.
Results 1 to 2 of 2
Thread: Which tig Dynasty 200 DX or 350
Hybrid View
-
01-08-2008, 10:55 AM #1
Junior Member
- Join Date
- Jan 2008
- Location
- Pittsburgh, Pa
- Posts
- 9
Which tig Dynasty 200 DX or 350
-
01-08-2008, 01:39 PM #2
Senior Member
- Join Date
- Mar 2007
- Posts
- 132
A Dynasty 200dx is a high end machine.
A basic tig would be a Miller Syncrowave 200.
If all you're going to do is 1/4" steel and aluminum at home then go with the Dynasty 200dx.
-James
Reply With Quote
