Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 13

Hybrid View

  1. #1

    Default I have an Miller Syncrowave 300 Ac/Dc TIG whats not vill work Correct!!

    I have a Miller Syncrowave 300 Ac/Dc Tig not work as it should!
    stick works!
    But not TIG with switch In remote mode! no power then!
    but if change the contactor they will get full power ut then as soon as the stick makes contact with the -ground!!

    Yes!!! I saw a power cord that has connected to it was incorrectly fitted the phase set at zero! so maybe something happened!!

    The relay cr1 its work then i put thw switch to contacor mode,but the relay are not work with the pedal or the button on the handle!!!

    Anybody that have any idea what they might be doing wrong?

  2. #2
    Join Date
    Feb 2009
    Location
    Maryland
    Posts
    707

    Default

    I would test the remote - first test replace with a known working one.

    If that is not an option, you can short the remote contact pins. See the service manual to get the pin numbers.

    Leave the power control on 'local'
    Con Fuse!
    Miller Dynasty 350
    Millermatic 350P
    -Spoolmatic 30A

    Hypertherm PowerMax 1000G3
    Miller Multimatic 200 - awesome portable MIG (and stick and TIG)
    Miller Maxstar 200DX - portable TIG and stick

  3. #3
    Join Date
    Mar 2007
    Location
    Deltaville, VA
    Posts
    2,239

    Default

    You lost me (for sure) when you said the power cord was incorrectly installed and phase was set to zero.

    Is English a second language?
    Syncrowave 250 DX Tigrunner
    Dynasty 200 DX
    Miller XMT 304 w/714D Feeder & Optima Control
    Miller MM 251 w/Q300 & 30A SG
    Hobart HH187
    Dialarc 250 AC/DC
    Hypertherm PM 600 & 1250
    Wilton 7"x12" bandsaw
    PC Dry Cut Saw, Dewalt Chop Saw
    Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
    Thermco and Smith (2) Gas Mixers
    More grinders than hands

  4. #4

    Default

    i speak swedish also..but not so verry good in english!

  5. #5
    Join Date
    Nov 2010
    Posts
    265

    Cool

    Är detta er första maskin och gjorde ni komma ihåg att koppla upp TIG och frånkoppling käppen?

  6. #6
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    358

    Default

    Check pins A and B on the remote for switch closing. check C D and E for adjustable resister. Short pins A to B is remote socket. see if relay CR2 closes.
    If CR2 closes but welder does not work. look real close at the relay and see if one of the wires inside is broken. If the current control is set in panel and set to max you will have max output when ever contactor switch is closed.
    Made sure the foot control and panel switches are all working and the cr2 relay.
    Then we will look deeper in the welder. Post back with the serial number so I came use the correct diagram to help you with.
    Glenn 300 amp stick
    Millermatic 35
    L-tec plasma

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.