Wanting to buy a 350P?

[Alloytoys]

I am new here and it seems like a good place for advice. I am looking to buy a 350P with a push pull set-up for aluminum. I would like to find a good used one reasonably close to where I live. I found one about 1000 miles away that is about two years old. Is there any improvements from 2008 to a new model? The one I found looks to be in good shape but it is a long drive just to check it out. I may be better off buying new but that is a chunk of change. Thanks in advance!

[cruizer]

I'd say buy one with serial# LH460185B and above, as there were a few changes in 2008

[Alloytoys]

Thats good to know, Thanks!

[mengineer]

Some one just put a 350P with a 30A spool gun up on eBay. It also come with two tanks(look to be 125cf or bigger), and the dual bottle rack. I forget the location, search millermatic 350p and it'll pop up. He has the starting bid set for $3300 and no bids yet. Might be worth checking out, could save you a couple grand.

[Alloytoys]

Thanks for the heads up. I'm going to check it out right now.

[Checkered Flag]

I've been toying with the idea of selling mine.. I'm a bit far from you though.

Machine has maybe 1 hour on it.

I bought it new about 6 months ago and it still has over 2 years warranty. Has the push/pull gun XR-ALUMA-PRO 25FT. I bought it for $5500

It's way overkill for what I do and it's been sitting in my heated basement with a bed comforter over it since, about an hour after I used it lol...

Mint condition, 3 big spools of 4043 wire, 24-25 tips, and a couple other odds/ends, everything, manuals etc.

If you are serious, I will bolt it back down to the original pallet it came on and have it delivered to your doorstep for 4200

Let me see if I can dig some pics up...

Thanks, Scott