which gun do i buy for my millermatic 200?

[fikosheetmetal]

i recently got my hands on two matching millermatic 200's for only $350, but they are both missing the welding guns.

Idk where i can find the gun i need for these babies.

I wanna compare prices so can someone help me out by letting me know where i can purchase new ones and used ones? links to online sites would be good, thanks.

[84ZMike]

Here is your owners manual...
http://www.millerwelds.com/om/o1303p_mil.pdf
and the MM200 used a GA-20C (according to the OM)... I think it's a Tweco...
Mike

[welderman23]

go with tweco guns i like em

[aametalmaster]

I would go with a current model M-25 from Miller. I have 5 GA-20C guns hanging on a nail and they are junk from all the years i used then, bad design, i was always working on the triggers. But we used them for many hours a day. Look on ebay lots of guns there...Bob

[fun4now]

man could i use a deal like that.
according to the book it should get a M-25 as the new replacement gun.
the bernard option would be the Q200 SERIES.
if you are looking for the cheapest option, shop for a miller compatible 250amp gun.
if you only need one welder i would buy a decent gun for them both and sell one off to cover the $$ you should come out of it with $$ in your pocket and a welder. the MM200 is very popular and still looked for by many. getting a good $$ for one on e-bay should not be a problem, possibly even a local sale .
good luck, and congrats on the great new toy's.

[tnjind]

I bought a new Bernard 400 amp Q gun for my Linde wire feeder off of ebay for $100. I had to make an adapter on the lathe, no big deal.
Look on ebay, lots of guns on there.