Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 8 of 8

Hybrid View

  1. #1
    Join Date
    Sep 2006
    Posts
    313

    Default Bottle Brick or Plastic Block Box Project

    You can follow it on my website if you're interested in that kind of thing.

    http://harveylacey.com/wordpress/?p=262 or click on the signature

  2. #2
    Join Date
    Sep 2006
    Posts
    313

    Default

    There comes a time when you have to either cut bait some more or finally get to fishing.

    I've got the block box to a point where I can use clamps and temporary stuff to try to make a plastic block.

    Today's the day. If you're in Texas and you hear a scream not unlike a bobcat's mating call or a hawk verbalizing displeasure, it worked. If there's nothing but silence, I'm working on fixing whatever ain't working.

    I have an advantage over most people on stuff like this. I have lots of failures for a reference point. I've known failure many times. I don't look at failing as so much a bad thing as I did when I was young. The reasoning behind the more mature vision on failing is I've seen a lot of those who are frozen in place with the fear of failing.

    I never want to be one of those. So if I succeed credit trying. If I fail today, remember there's tomorrow. I'm trying.

  3. #3
    Join Date
    Sep 2006
    Posts
    313

    Default

    We did it!!!

    This is an open source project. Think of it like Linux software.

    So if you have an ideas that you can think that will help out or make it better please share, PLEASE!!!!

  4. #4
    Join Date
    May 2008
    Location
    Troy, MI
    Posts
    340

    Default

    Now that you have it working could you explain the process that you use to make a block?

    You mentioned pressure -- I assume that heat involved?

    Miller Thunderbolt
    Smith Oxyacetylene Torch
    Miller Dynasty 200DX
    Lincoln SP-250 MIG Welder
    Clausing/Coldchester 15" Lathe
    16" DuAll Saw
    15" Drill Press
    7" x 9" Swivel Head Horizontal Band Saw
    20 Ton Arbor Press
    Bridgeport

  5. #5
    Join Date
    Nov 2008
    Location
    Nevada, TX (near Dallas)
    Posts
    9

    Default

    Hello, I am Bob.

    Harvey and I are working on this together. The brick was made using nothing but a threaded rod to provide pressure and manpower to turn the rod. The entire machine with the exception of the threaded rod and the nut was made from scrap steel.

    That is part of the goal of this project, to make it easy to build and inexpensive to operate. No electricity, motors or engines required, just manpower.

    Here are a couple photos:

    Overall of the machine
    Inspection (Harvey on the left, me on the right) during compression
    Finished block under load test.
    Attached Images Attached Images

  6. #6
    Join Date
    Sep 2006
    Posts
    313

    Default

    We think we have a workable model to introduce to the world now. It's open source and I've listed all the materials used plus measurements so anyone anywhere can build one and start making blocks. Hopefully others will jump in and make improvements and we all win.

    I understand it's not for the consumption here in the U.S. unless you want to make your own retaining wall out of recycled plastic blocks. Or you are out in the country far enough from codes and inspectors to build your own house the way you want.

    Read my blog and compare what we've offered to what others are doing.
    Last edited by wroughtnharv; 12-22-2010 at 10:52 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.