Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jun 2009
    Location
    greenfield new hampshire
    Posts
    876

    Default busted dana 44 axle shaft

    i broke a rear axle in my jeep, which is fairly common, it broke at the usual spot, at the splines, i didnt have the heart to throw it out, i figured i would find a use for it some day, i wish i had a camera and new how to use it, but for now please bear with me. i took the shaft and bolted it to an old brake rotor, then bolted or can be welded, 2 more old rotors to the rotor/axle assembly, so now i have 3 rotors with an axle on them, axle pointing up. scrounge around your shop find a vice, cut and drill apiece of plate for the vice, on the bottom of the plate, make a sleeve that will fit over the axle, weld it to the plate, its best if the sleeve has a hole drilled thru it with a big nut welded over it for a bolt to sinche up on the axle, i just ground a flat spot on the axle so it will stay in position. this is a really simple thing to build, the beauty of it is that the finish height of the vice is about 3 feet, which is the usual height of most welding tables, how many times have you had a job 3x the length of your table, simple, just clamp a stick o angle iron in the vice, now its an extra support for your table. that is why the nut and bolt on the sleeve, to adjust the height, and when done, no need to pick it up, it rolls and if you are concerned that it will topple over, just cut a few short pieces of round stock about 1/2 inch will work and tap them into the cooling slots on the bottom rotor, this will stabilize it.i hope i didnt bore you guys with this, but after i built this thing,it has proved more usefull than i could ever imagine. thanks for your time kevin

  2. #2
    Join Date
    Nov 2007
    Location
    Saskatoon, Sask, Canada
    Posts
    1,270

    Default

    Sounds like a good use for it, pics would be great!!!
    at home:
    2012 325 Trailblazer EFI with Excel power
    2007 302 Trailblazer with the Robin FOR SALE
    2008 Suitcase 12RC
    Spoolmatic 30A
    WC-24
    2009 Dynasty 200DX
    2000 XMT 304
    2008 Thermal Dynamics Cutmaster 52
    Sold:MM130XP
    Sold:MM 251
    Sold:CST 280

    at work:
    Invision 350MP
    Dynasty 350
    Millermatic 350P
    Retired:Shopmaster 300 with a HF-251

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137