Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 5 of 5

Hybrid View

  1. #1
    Join Date
    Dec 2007
    Location
    Austin, TX
    Posts
    621

    Default Lift-Arc experiences?

    I am looking at a Maxstar 150. Currently I have a Sycrowave 180, so I'm not sure if I could work without a HF start.

    The STL is better for me price-wise but to get HF and pulse as a bonus for $400 more it's very tempting. I am wondering if people who are used to HF, have been happy with only lift-arc.

  2. #2
    Join Date
    Oct 2007
    Location
    Indiana
    Posts
    541

    Default

    I have a syncrowave 350, I use only HF start, I tried the lift arc start a couple of times, seemed kinda strange. Would be much better then scratch start tho.
    Tim Beeker,
    T-N-J Industries
    (my side bussiness)

    Miller Synchrowave 350LX with tigrunner
    Esab 450i with wire feeder
    HH135 mig
    Thermal Dynamics cutmaster 51 plasma cutter
    Miller aircrafter 330 - sold
    Marathon 315mm coldsaw
    vertical and horizontal band saws
    table saw
    Dewalt cut off saw
    Sand blast cabinet
    lots of hand grinders
    Harris torch
    beer fridge

  3. #3
    Join Date
    Nov 2006
    Location
    toronto,ontario
    Posts
    90

    Default lift arc

    i own a maxstar 140s and a 150 and they are ok when your in an environment that you cant have the hf on but that type of work is usually not critical as far as start inclusions or any other forms of contamination is concerned.If you want your work to be a1 then i would say a unit with high freq is the way to go( i cant do without it due to the fact 95%of my work usually has to be x rayed so i dont like touching the work piece at all, hope that helps and take care

  4. #4
    Join Date
    Nov 2006
    Location
    Hampton, Va.
    Posts
    386

    Default

    Lift Arc takes getting used to. I have a machine that has both lift and hf and I use hf most of the time. I practice with the lift arc and can use it fairly good but as said it takes practice, at least it did for me because of using hf for 30 years.

    Wheelchair

  5. #5
    Join Date
    Aug 2007
    Location
    So. Cal
    Posts
    335

    Default Bad deal..

    I learned on lift arc and created a better way to start from LA if that's all you have i.e. no HF. Take a piece of phone wire (copper #24 or 26) and cut it to about 1/8" long. scratch your tungsten across some candle wax and attach your phone wire to this. It works excellent for starting your arc and just melts away to nothingness. I used to cut about a 100 little pieces of wire and had a block of wax (glue) ready to go and it doesn't take long once you get it down. Even though all our machines have HF, the above method is great if your working close to a hospital or other such dwelling where you have to be careful about HF and of course if you don't have HF at all.

    Good Luck

    TacMig
    We depend On:
    Miller | Esab | Lincoln | Fronius
    Baileigh | Drake | Eagle | Knuth
    Victor | Harris | Smith | Bessey
    Snap-On | Hilti | Ingersoll Rand
    Burco/Koco | Onan | BobCat
    Tracker | Infratrol | AmeriCast

    We belong to or support:
    American National Standards Institute
    American Welding Society
    The Welding Institute
    Fabricators & Manufacturing Association Int'l.

    Anderson & Co. LLC
    Metal Cr
    afters

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.