Here are a few of my latest projects, the first being a pamplet stand for the office. Its hard to see in the pic but the uprights were made with 3/4" angle and 1/2" angle for the smaller pamplets up top. Plexiglass was then slipped in between them with 3/4" #9 flat expansion material for the backing. The whole thing stands about 50" high, 48" wide.
The camp fire poker is all one piece 1/2" square stock cut, heated and formed to shape.
The third is a stand for my Dewalt saw made out of 4" x 8" tubing leftover from a gas station demolition. It already had the base attached. All I had to do was cut it to size and add the top plate.
For those familiar with one of my earlier postings, I have started on the armored vehicle. I am taking pics as I go along. They will be posted some day.
Results 1 to 8 of 8
Thread: Latest Projects
12-25-2007, 09:24 PM #1
What else is there besides welding and riding. Besides that
Miller Thunderbolt XL 300/200 AC/DC
Hobart Handler 187
Dewalt Chop Saw
4" Air Grinder
Rigid Drill Press
Kellogg 10hp Air Compressor