Trying to weld a stainless steel exhaust together, prepping the flanges, welds seems to be undercut it but if I set the amp too low it won't even melt the SS .
any suggestions
SS flange 304
SS tube dunno
filler rod 309L
solar flux for back
Dynasty 200DX with argon @ 65 AMP
any suggestion I can do it better? cause cleaning the molten on back is a pain.
Results 1 to 5 of 5
Thread: comments and feedback
-
10-26-2010, 04:03 PM #1
Member
- Join Date
- Jul 2009
- Location
- New York New York
- Posts
- 30
comments and feedback
-
10-27-2010, 06:47 PM #2
Junior Member
- Join Date
- Mar 2008
- Location
- Oklahoma Pilgrim
- Posts
- 24
More filler.
-
10-27-2010, 07:22 PM #3
Member
- Join Date
- Jul 2010
- Location
- central Kansas
- Posts
- 66
More filler for sure and point the to torch towards the undercut and increase heat add filler decrease heat move over 1/8 and repeat the decrease in heat will help the metal cool so it dosent burn thru as easy. you will be layin dimes in no time!!
-
10-28-2010, 06:48 PM #4
Member
- Join Date
- Jul 2009
- Location
- New York New York
- Posts
- 30
Thanks will give that a try over the weekend. Welding is not exactly my day job as you can see... Any tips will be helpful
-
11-09-2010, 02:45 AM #5
Junior Member
- Join Date
- Nov 2010
- Posts
- 6
welding is too not mine job, so i m also waiting for the tips.
Reply With Quote
