Condensed to thread here: http://www.millerwelds.com/resources...-press-brake-1
Results 1 to 4 of 4
Thread: My DIY press brake 7
10-21-2010, 03:57 PM #1Member
- Join Date
- Dec 2009
My DIY press brake 7
Last edited by Joe from N.Y.; 10-21-2010 at 09:31 PM.Millermatic 211
Everlast 200DX TIG
Lincoln Weld-Pak 100
Century Stick welder
Hypertherm Powermax 30 plasma cutter
Oxy set-up with Henrob 2000 torch
Logan 200 lathe (60 years old)
Jet band saw
10-21-2010, 05:30 PM #2
I am surprised that it will bend the bar to 90 degs.
Press brakes usually have a die with the apex removed and an angle less than 90 degs.
Still that said yours seems to work fine well done.
JiGrip it and Rip it
10-21-2010, 06:38 PM #3
Nice! That looks serious...Professional firefighter (retired). Amateur everything else I try to do...
Oh yeah: GO BIG RED!
10-21-2010, 07:04 PM #4Senior Member
- Join Date
- Feb 2009
- Lodi, CA
In the future, remember there's nothing wrong with hitting "reply" on your own thread. You can do this indefinitely, posting pictures each time. The advantage, of course, is for all the rest of us, we don't have to skip around to seven different threads to see everything. The limit on pictures, is only for each post, not for the thread total.Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....