If you are like me and ride dirt bikes than you are also like me and have to do minor repairs while at the track from time to time. The problem here is that some times you place the small bolts on top of the bike seat nice and safe. But when it comes time to reassemble the bolts are missing, knocked off and lost in the grass. The other issue is spary cans like chain lube, WD40, air filter oil and silicone don't balance well on the seat.
Today I decided to make a tray that will assist with 'At The Track Servicing"
With a section of tube and a biscuit cut from a round bar of weldable ali I clamped the two together and wire brushed them.
Results 1 to 4 of 4
09-30-2010, 06:34 AM #1
At The Track Dirt Bike Service TrayGrip it and Rip it