Yeah, nothing no one hasn't already seen a few times, I'm sure.
Been wanting to make one for stuff like this, has many other uses too, like on welding tables with square holes cut or cast in them such as Acorn. I plan on making several more to use on my bigger table, gotta make some sleeved holes in it first tho.
Nothing more than a Vise Grip 11R (never use cheap ones, they are crap) with a 1" square piece of stock welded to where the stationary jaw was. I added an extension to the moving jaw, just a small piece of scrap. The force of pressure against the jaw simply jams it in the hardy hole, locking it in place. It can be made infinitely adjustable too, just make the bar for the hardy hole longer.
I'm in the process of making a montage for some address numbers, needed something to hold smaller stuff like the leaf pictured down on the anvil so I can detail it without it moving all over the place.
I'm by far NO expert blacksmith or ornamental iron artist, but I like to mess around with it when I get time.
Results 1 to 8 of 8
Thread: Hold It!
09-22-2010, 09:34 AM #1
Hold It!So you're telling me...You're not nostalgic? Then, give me another word for it......
09-22-2010, 05:33 PM #2Senior Member
- Join Date
- Oct 2009
Cool little project, I'm gonna have to Make one up for my anvil now too.Miller syncrowave 200 runner with coolmate 4
and wp2025 weldcraft torch
Miller 125c plasma cutter
09-22-2010, 05:59 PM #3Senior Member
- Join Date
- Mar 2006
Yeah, me too.
09-23-2010, 12:40 AM #4
i dont have an anvil but i do have a 6in thick tool steel plate with 2x2in perforations in it so this will be a cool way of fixturing thingsLeblond Makino mills
HAAS CNC SL-40 lathe
American Pacemaker lathe
wells index mill
Miller Elite Vintage USA
09-23-2010, 08:22 PM #5
7a749 , thats a pretty nice looking anvil you got there.Dynasty 200DX "Blue Lightning"
Bernard 3500ss water-cooler
Rockwell vertical mill
Beverly Shear B-3
Beverly Shear JR
Home-made English wheel
Tennsmith 36" stomp shear
Fixer upper 1968 Redface Lincoln sa200
09-23-2010, 10:56 PM #6
150# Hay Budden, early style, entire tool steel forged upper.
The later ones only had a plate for the top.
It's around 100 years old or so from best guess.
I got the info from a friend on another board that knows anvils pretty well. Paid about $350 for it 6 years ago.
I like it a lot.So you're telling me...You're not nostalgic? Then, give me another word for it......
09-24-2010, 07:41 PM #7Senior Member
- Join Date
- Dec 2007
Great idea - so simple yet I'm kicking myself.
Duh, if it was so simple and obvious, why didn't I didn't come up with it?
This is why I love this forum.
ThanksThermal Arc GTSW400, Airco Heliwelder II, Miller Dynasty 350, Hypertherm 1000, oxy-fuel setup, metal cutting bandsaw, air compressor, drill press, etc.:
Call me the "Clouseau" of welding !
09-24-2010, 07:56 PM #8
I hate to say it, but I ended up making the leaf details on my metal table with no hold downs. The piece cooled off too quickly & was a PITA to reheat on the anvil.
It still is handy for other stuff thoSo you're telling me...You're not nostalgic? Then, give me another word for it......