Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 8 of 8

Thread: Rotiserrie BBQ

  1. #1
    Join Date
    Sep 2005
    Location
    Riverside, CA
    Posts
    3

    Default Rotiserrie BBQ

    For many years I had dreamed of conquering the ultimate barbecue feat, spit roasting a whole pig. I started this project a year ago and was able to finish just before 4th of July, working here and there in the evening and weekends.
    There were very few complications when the day came and it turned out to be a great success. Im trying to figure out a better way to secure the pig to the spit, it bounced around a little too much.
    I think I redesigned this thing about 5 times.
    I used 2x2 by .083 steel tubing for the main frame, and 3/4 tubing for the coal pan framing and motor. I used 16ga metal for the skin on the coal pan.
    I used a large motor with a gear reduction to 6 rpm to turn the spit. The chain and gears are the same that you can get for a CR50 dirtbike.
    This thing was fairly expensive to build, about $800(motor was expensive). If you look at some that are sold for $2500, I guess its not that bad though.
    Overall this was very fun to build, and I would recommend anyone who has a love for barbecueing give it a try. This would not let me post many pictures, if anyone would like to see more just let me know.
    Attached Images Attached Images

  2. #2
    Join Date
    Oct 2005
    Posts
    6

    Default

    Nice looking roaster you have there. We just roasted two pigs Sept 17. We roasted one on a rotiserrie a friend of mine owns which is made from a stainless steel parts washer. I made the other one earlier this year. Sorry I don't have a very good picture of it.

    You can take a look at www.roastreport.com which has some pics from last year. The site should be updated soon with some pics from this years roast.



    Last edited by sgoeing; 10-04-2005 at 08:03 PM.

  3. #3
    Join Date
    Oct 2005
    Posts
    6

    Default

    just a few more




  4. #4
    Join Date
    Sep 2005
    Posts
    1,258

    Default

    ,/viuy[dSLKJHF saj;sdfjlhsdg;fdsbv;fdsmvnd.mnt'4lliu

    oops had to change out my keyboard drooled all over it, i'm going to the fridge

  5. #5
    MACONA Guest

    Exclamation Missing Item

    One very important item missing from both of your designs. Finger guards around the chain drive. It may be moving slow but those gear drive motors wouldnt even notice if your kids finger got in there.

    -Jerry

  6. #6

    Default chicken wire

    i hope that chicken wire around the pig is not galvanized. could make you sick.

  7. #7
    Join Date
    Jul 2009
    Posts
    7

    Default

    I made a basket to hold the pig in my sons roaster. It is made with 3/4"x .035 SS tubes left over from a heat exchanger build.
    The motor is a 2 rpm Dayton gearmotor from Surplus Center $87.00.
    Attached Images Attached Images

  8. #8
    Join Date
    Aug 2007
    Location
    Florida
    Posts
    41

    Default

    These are some sweet roasters. I always thought about putting a rotisserie in my smoker. I am getting ready to build another smoker so maybe I will put one in it.

    I have heard about 2 RPM is about right for this. I don't have a clue, just what I heard..
    Just because you have one, doesn't mean you have to act like one.

    Miller 212
    Hobart 135
    Miller 375 X-treme
    Really antique Sears Arc N Spark
    O/A Torch Setup

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 74

Welding Projects

Special Offers: See the latest Miller deals and promotions.