I am building a trailer to haul around my two atv's and mabye some wood or just about anything that you would use a trailer for.
I am using 2x2 tube .125 wall and 2x2x1/4 angle all for the bed frame it is 7 feet wide and 12 feet long. With the torsion axle's I am using they are stubs so I had to put double frame rails down each side and the crossers are at 20 inch centers.
I will be using 1x1 x.125 for all the upper frame sides covered in 3/4 expanded metal
and the two drop gates for loading will also be 1x1 tube.
the axles are 3500# with 15 inch tires.
Question----- Do you think this will be to heavy? I wanted to make it strong and sturdy able to handle alot.
And also a plant shut down that I did work at so I got a super deal on alot of steel
tube,angle,flat bar pipe and so on and that is what i had to work with!!
I will post progression pics to see what you all think
Also I do alot of mobile repair but this is my first trailer build project
Results 1 to 3 of 3
Thread: Building a Utility Trailer
09-09-2010, 05:27 AM #1Senior Member
- Join Date
- Mar 2010
Building a Utility Trailer
09-09-2010, 06:30 AM #2
There is no way that is too heavy. Not IMO
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
09-09-2010, 08:04 AM #3Senior Member
- Join Date
- Sep 2005
- Warren PA
the weight should be easily calculated. You should be able to find charts on weights of various shapes on steel supplier web sites.
For example, the 2x2x1/4" angle weighs 3.19 lbs/ft, the tube weighs 3.05 lbs/ft.