I am building a trailer to haul around my two atv's and mabye some wood or just about anything that you would use a trailer for.
I am using 2x2 tube .125 wall and 2x2x1/4 angle all for the bed frame it is 7 feet wide and 12 feet long. With the torsion axle's I am using they are stubs so I had to put double frame rails down each side and the crossers are at 20 inch centers.
I will be using 1x1 x.125 for all the upper frame sides covered in 3/4 expanded metal
and the two drop gates for loading will also be 1x1 tube.
the axles are 3500# with 15 inch tires.
Question----- Do you think this will be to heavy? I wanted to make it strong and sturdy able to handle alot.
And also a plant shut down that I did work at so I got a super deal on alot of steel
tube,angle,flat bar pipe and so on and that is what i had to work with!!
I will post progression pics to see what you all think
Also I do alot of mobile repair but this is my first trailer build project
Results 1 to 3 of 3
Thread: Building a Utility Trailer
09-09-2010, 05:27 AM #1Senior Member
- Join Date
- Mar 2010
Building a Utility Trailer
Last edited by hjm; 09-09-2010 at 05:30 AM.
09-09-2010, 06:30 AM #2
There is no way that is too heavy. Not IMOMiller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT
Miller 30-A Spoolgun
Miller Spectrum 300
Miller Spoolmate 200
Miller 225 Thunderbolt
09-09-2010, 08:04 AM #3Senior Member
- Join Date
- Sep 2005
- Warren PA
the weight should be easily calculated. You should be able to find charts on weights of various shapes on steel supplier web sites.
For example, the 2x2x1/4" angle weighs 3.19 lbs/ft, the tube weighs 3.05 lbs/ft.