Hi, my name is Mark. Just signed up for this forum and I'm totally enjoying it! I'm currently a B.C.I.T. student in Vancouver B.C. I would love to start my own mobile welding business in the future and can use as much guidance as I can come across. Any advice with regards to equipment, vehicles, billing, and promoting such a venture would be pure gold! Also, people's experiences, both bad and good, would be excellent. Many thanks for your time and for making this such a great forum!
Results 1 to 5 of 5
Thread: Mobile welding advice...
12-17-2007, 01:05 PM #1Junior Member
- Join Date
- Dec 2007
Mobile welding advice...
12-17-2007, 01:26 PM #2
You would be much better off to simply search for your answers and also just join in our conversations than expect everyone to jump in with that many questions...I do respect your enthusiasm tho and welcome to the board.
Try the motorsports side as well there are several people from your neck of the woods there and they do all types of welding as well.
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
12-17-2007, 01:57 PM #3
thats a lot of info for one post.
break it down into a few category's and do some searches. do some looking at mobil rigs/trucks , those post will give some great info on good and bad idea's when building/buying a truck. there are also some posts about insurance, as well as advertising . consider what type of mobile welding you want to do. pipe, fence or whatever comes your way.
getting some time out in the muddy before jumping into your own thing will be a great asset. spend some time with the guys that been doing it and learn some tricks of the trade. learn the most often mistakes and try to avoid them.. spend some time with the search option here and on the motor-sports side. lots of truck builds over there . lots of good info in them.
welcome good to have ya.
hope i helped
feel free to shoot me an e-mail direct i have time to chat. email@example.com
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
12-17-2007, 02:08 PM #4
Im only ten minutes from BCIT (bby), If that. I'm over by the mountain. Welcome aboard. Look for COALSMOKE on the Motorsports Forum. He's in Langley, has his own rig(s) and is knowledgable. I started a thread called "Hey Coalsmoke" if you bring it to the top, you'll make a new friend.
Last edited by SignWave; 12-17-2007 at 02:11 PM.Will it weld? I loooove electricity!
Miller 251/30A spool
Precix 5x10 CNC Router12"Z
Standard modern lathe
Cheap Chinese mill that does the trick... sort of...
horizontal 7x12 bandsaw
Roland XC540 PRO III
hammer and screwdriver (most used)
pooper scooper (2nd most used...)
12-17-2007, 02:57 PM #5
Welcome, Mark, from Ont.XMT-300 with S-64 wire feeder.
Lincoln HI-FREQ modified to run XMT.
Esab PCM-875 plasma cutter.
Miller PC-300 pulser
Miller Optima pulser