I'm in the process of building a go kart and according to my plans "must'' cut a perfect 1'' hole in 1'' erw tubing for the steering system. My 1''-1/8th hole saw is to big and of course the 7/8 to small. Does anyone make a 1'' hole saw and if so where might I purchase one. Thanks ken
Results 1 to 10 of 16
Thread: is there a 1'' hole saw
Hybrid View
-
08-24-2010, 04:30 PM #1
Junior Member
- Join Date
- Mar 2010
- Posts
- 4
is there a 1'' hole saw
-
08-24-2010, 05:09 PM #2
Senior Member
- Join Date
- Oct 2009
- Posts
- 254
Every company that makes hole saws makes a 1" hole saw. You can buy themjust about anywhere, home depot for example.
Miller syncrowave 200 runner with coolmate 4
and wp2025 weldcraft torch
Miller 125c plasma cutter
-
08-24-2010, 07:11 PM #3
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,636
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
08-24-2010, 07:34 PM #4
Senior Member
- Join Date
- Dec 2008
- Location
- Arizona
- Posts
- 801
You can surely get a 1" hole saw, but I doubt you would get a "perfect" hole with one. Maybe you are better off drilling with the 7/8" one and file fitting the rest.
Originally Posted by eschuen
Miller Syncrowave 200
Homemade Water Cooler
130XP MIG
Spectrum 375
60 year old Logan Lathe
Select Machine and Tool Mill
More stuff than I can keep track of..
-
08-24-2010, 09:39 PM #5
Senior Member
- Join Date
- Feb 2006
- Location
- Northern CA, Shasta CO.
- Posts
- 134
You can even get a 25mm metric which would be a couple hundredths under in a perfect world. But like has already been mentioned, no hardware store hole saw is going to give you anything close to "perfect" if perfect is really necessary.
-
08-24-2010, 10:02 PM #6
Senior Member
- Join Date
- Dec 2009
- Location
- Northern California
- Posts
- 179
Probably more expense than you would be willing to spend but have you looked at the Hougen or Blair cutters? Very clean and efficient cutters for nice round holes.
-
08-25-2010, 12:32 PM #7
Senior Member
- Join Date
- Oct 2009
- Posts
- 254
If it needs to be a perfect 1"hole bring it to a machine shop and have it milled undersized and reamed to 1".
Miller syncrowave 200 runner with coolmate 4
and wp2025 weldcraft torch
Miller 125c plasma cutter
-
08-25-2010, 09:33 PM #8
Junior Member
- Join Date
- Jun 2009
- Location
- So Cal Desert
- Posts
- 25
Dumb question here? Your hole size equals the tubing diameter your drilling through. So in essence you’re cutting the tubing for a fish mouth for another tube to pass through. If this is the case I use the holesaw of the same diameter as the tubing. It’s a good fit up may not be perfect but it works. I have used this for years for horse corrals.
Reply With Quote
