I need to haul 3 ATV's in a cargo trailer, but the trailer is too short.
It's 16.5 ft, right in the middle.
Does anyone have any ideas, plans etc. for building racks that would allow me to piggy back the quads?
Perhaps a rack that would fit over the top rear of the quads, so another can mount over the back, on an angle.
I don't want to stack one on top of the rear rack, just over it.
I have 2 2WD and the 3rd is a 4 WD.
I don't have enough vertical room to stack one completely on top of the other.
The 4WD can be mounted as near vertical as the room allows.
Results 1 to 8 of 8
08-19-2010, 05:09 PM #1Senior Member
- Join Date
- Oct 2008
Hauling 3 ATV's in a Cargo TrailerMillermatic 211 AutoSet w/MVP
Century 110 volt 90/110 MIG-Gone to my son, in Texas
Victor SuperRange OA
Milwaukee Cold Cut Saw
Milwaukee Portable Deep Cut Bandsaw
Milwaukee Hole Hawg
Jet Horizontal/Vertical Bandsaw
Jet MD-18 Mill Drill
Orbit Drill Press
12 Ton Floor Press
2002 E-350 V-10:
1983 F-150 4.9L 6
2004 Honda ST1300
2007 Suzuki LTA400F Quad
1997 Suzuki DR650