Does anyone have any experience with making one? Looking to build a small one for our pond to fish off of(only about a 1 acre pond so 8x12 or so would be plenty) Designing the deck and cross bridge are a breeze, but I'm not sure what to do about floats or where to get them from? Thanks
Results 1 to 6 of 6
Thread: Pond Dock?
-
08-13-2010, 07:16 PM #1
Member
- Join Date
- Aug 2007
- Posts
- 47
Pond Dock?
-
08-13-2010, 07:42 PM #2
Junior Member
- Join Date
- Apr 2010
- Location
- oklahoma city, ok
- Posts
- 16
I build docks for a living. What state do you live in? I can help with any questions you might have. Travis
-
08-13-2010, 08:24 PM #3
Member
- Join Date
- Aug 2007
- Posts
- 47
I'm on the S.E. side of OKC ironically enough
Originally Posted by lik2waterski
-
08-14-2010, 09:13 AM #4
Senior Member
- Join Date
- Jul 2006
- Posts
- 1,508
What about those plastic barrels? Originally Posted by welder13
Caution!
These are "my" views based only on “my” experiences in “my” little bitty world.
-
08-14-2010, 08:29 PM #5
Junior Member
- Join Date
- Apr 2010
- Location
- oklahoma city, ok
- Posts
- 16
the floats you can get from cellofoam. they are located in sallisaw ok. They just bolt up.
-
09-11-2010, 12:24 AM #6
Junior Member
- Join Date
- Sep 2010
- Posts
- 6
plastic barrell's. its what i used. & make sure the construction is in the shape of a giant "T", or else the dock will wobble & tip, the "T" shape stablizes it from rolling on ya. so ya, BIG plastic barrell's that are sealed, u can even put just a small amount of water in them to prevent bouncing bouyancy- but careful wiwth how much.
Reply With Quote
