I'm new to the whole tig thing but need to get up to speed on welding thin (22 guage) to thicker (3/16") 304 stainless steel. Any help is appreciated.
Results 1 to 2 of 2
Thread: thin to thick tig welding
12-15-2007, 03:08 PM #1Junior Member
- Join Date
- Dec 2007
thin to thick tig welding
12-15-2007, 06:59 PM #2
yeah i hear ya. I was trying to fuse a 3/8 Al rod to some 1/8th plate and it kept blowing out. I iether melted the rod into goo or the plate went all wrinkly..need practice.
Propulsion, syncroman, engloid and alot of other fellows here are good choices for brain picking. Theres alot of experience years on this forum and the motorsports side.Will it weld? I loooove electricity!
Miller 251/30A spool
Precix 5x10 CNC Router12"Z
Standard modern lathe
Cheap Chinese mill that does the trick... sort of...
horizontal 7x12 bandsaw
Roland XC540 PRO III
hammer and screwdriver (most used)
pooper scooper (2nd most used...)