Where is a good place to purchase dryers for my new plasma cutter? How many are recommended in series to insure quality filtering?
Thanks
Results 1 to 3 of 3
Thread: Dryer for SpectrumŽ 2050
Hybrid View
-
04-14-2006, 07:11 AM #1
Member
- Join Date
- Sep 2005
- Posts
- 72
Dryer for SpectrumŽ 2050
-
04-14-2006, 07:59 AM #2
Senior Member
- Join Date
- Jan 2006
- Location
- Albuquerque, NM
- Posts
- 1,788
A Motor Guard M-26 with 4 extra filters is $101 from IOC, or you can normally get a M-30 filter off ebay for lots cheaper (from the information I have they are the same). One should be enough I would think, maybe others would recommend more but I don't have any humidity here to speak of and the one motor guard works fine for me. Check this link for more info on this http://www.millermotorsports.com/mbo...=plasma+filter
Originally Posted by Trap Doctor
Last edited by Sundown; 04-14-2006 at 08:12 AM.
Regards, George
Hobart Handler 210 w/DP3035 - Great 240V small Mig
Hobart Handler 140 - Great 120V Mig
Hobart Handler EZ125 - IMO the best 120V Flux Core only machine
Miller Dynasty 200DX with cooler of my design, works for me
Miller Spectrum 375 - Nice Cutter
-
04-14-2006, 08:28 AM #3
Junior Member
- Join Date
- Mar 2006
- Posts
- 15
Here is one at a good price
cgi.ebay.com/ebaymotors/Compressed-Air-Filter-Sub-Micronic-Water-Filter-Trap_W0QQcmdZViewItemQQcategoryZ63702QQitemZ462188 8254QQrdZ1QQsspagenameZWD1V cgi.ebay.com/ebaymotors/Compressed-Air-Filter-Sub-Micronic-Water-Filter-Trap_W0QQcmdZViewItemQQcategoryZ63702QQitemZ462188 8254QQrdZ1QQsspagenameZWD1VLast edited by envano; 08-21-2007 at 01:58 PM. Reason: broken link
Reply With Quote
