While conversing with another member here on the forum, I found some parts list that he had provided links for. One of the parts I am interested in is the Miller 2 Roll Drive Roll Conversion Kit #155 454. I have yet to find any on EBay or from any online Miller Dealers or Suppliers. I am wanting to upgrade a MM 200. I recently picked up a Brand New in the box, GA-20C 12ft. stinger and a full set of all nozzles ever made for it. I have also picked up drive rolls for 0.023 and the contact tube for it. I have dual rolls right now, 0.035/0.045 and 0.030/0.035, you just swap sides to match the wire. I would appreciate any help from forum members or someone from Miller in trying to find a set. Thank you.
Charlie Johnson
Plainview, TX
Results 1 to 4 of 4
Hybrid View
-
07-05-2010, 08:48 PM #1
Senior Member
- Join Date
- Aug 2006
- Location
- Plainview, TX
- Posts
- 334
Looking for Drive Roll Conversion Kit
'77 Miller Bluestar 2E on current service truck
'99 Miller Bobcat 225NT for New Service Truck
'85 Millermatic 200 in Shop
'72 Marquete 295 AC cracker box in Shop
'07 Hypertherm Powermax 1000 G3 Plasma Cutter in Shop
Miller Elite and Digital Elite Hoods
-
07-06-2010, 03:59 PM #2
Senior Member
- Join Date
- Aug 2006
- Location
- Plainview, TX
- Posts
- 334
Found them...
Found a set at weldfabulous.com after playing around with my search parameters a bit more. Thanks for the views.
Last edited by flukecej; 07-06-2010 at 04:00 PM. Reason: Spelling
'77 Miller Bluestar 2E on current service truck
'99 Miller Bobcat 225NT for New Service Truck
'85 Millermatic 200 in Shop
'72 Marquete 295 AC cracker box in Shop
'07 Hypertherm Powermax 1000 G3 Plasma Cutter in Shop
Miller Elite and Digital Elite Hoods
-
07-08-2010, 02:55 PM #3
Senior Member
- Join Date
- Sep 2005
- Location
- northern NJ
- Posts
- 1,569
what does this conversion kit do? I can't find any info on it.
MM250
Trailblazer 250g
22a feeder
Lincoln ac/dc 225
Victor O/A
MM200 black face
Whitney 30 ton hydraulic punch
Lown 1/8x 36" power roller
Arco roto-phase model M
Vectrax 7x12 band saw
Miller spectrum 875
30a spoolgun w/wc-24
Syncrowave 250
RCCS-14
-
07-13-2010, 07:16 PM #4
Senior Member
- Join Date
- Aug 2006
- Location
- Plainview, TX
- Posts
- 334
Purpose of Converion Kit
The Drive Roll Conversion Kit is supposed to allow the user to change the drive rolls in the mig or wire feeder by twisting a knob to remove the roll. Otherwise, you have 3 screws to have to remove and re install one each roll when you change them. On a 2 roll unit, 6 screws, on a four roll unit, 12 screws. I found out about them in a parts list link sent to me. I even found them in a Miller Catalog once. It looked like a solution to changing drive rolls quick and easy when changing wire sizes in a Mig unit like the MM200.
As I said, I found the kit available at weldfabulous.com. My order came in today but there is a problem with it. Half of the parts that were supposed to be in the kit were not. At present, I am awaiting a reply from Weldfabulous about the fact the kit bag was RESEALED and parts were missing. I was not able to check the package until after business hours. Hopefully my experience with them will be good. I requested a replacement kit, with all the parts its supposed to contain be shipped to me and a RMA with prepaid shipping label and pickup for the defective kit. I will keep everybody posted on how this works out.
Charlie Johnson
Plainview, TX'77 Miller Bluestar 2E on current service truck
'99 Miller Bobcat 225NT for New Service Truck
'85 Millermatic 200 in Shop
'72 Marquete 295 AC cracker box in Shop
'07 Hypertherm Powermax 1000 G3 Plasma Cutter in Shop
Miller Elite and Digital Elite Hoods
Reply With Quote
