This is a Schuttle,some may call it a coal shoot door.I fabbed for a dodge 1 ton dump.3"x3"x5/16"thk. angle framing,handle and linkage 2"x3/8"flat, door 10ga.plt.Made the tracks from 1/2"sq and some 1/2"x1/8" flat strip.
Results 1 to 4 of 4
Thread: Asphalt Schuttle door
06-27-2010, 08:10 PM #1
Asphalt Schuttle door
Last edited by admweld; 06-27-2010 at 08:36 PM.BB402D
S-32 FEEDER W/1260 IRONMATE FC/GUN
06-27-2010, 08:23 PM #2Senior Member
- Join Date
- Feb 2009
- Lodi, CA
Same thing, different name. In California, that's called a "ditch gate" .....Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....
07-04-2010, 05:58 AM #3
Looks good, does it do the job the way you intended ? Cool !!!!!!!!
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
07-05-2010, 08:25 AM #4