this job come in today,,, its a dent
im going to fix it,
first i use a stud gun (it welds the sticks onto the panel) and start pulling the dent out.
next i take pictures and post them to the internet.
later i will use a hammer and dolly,, and start bondo and paint,, but we are not there yet.
![]()
Results 1 to 10 of 21
Thread: fixing a dent
-
06-26-2010, 04:18 PM #1
fixing a dent
Anything you could do, I could do better.
I can do anything better than you!
Lockheed Martin
Armco Steel, Baltimore
USW local #3185
-
06-26-2010, 05:26 PM #2
♦
Anything you could do, I could do better.
I can do anything better than you!
Lockheed Martin
Armco Steel, Baltimore
USW local #3185
-
06-26-2010, 06:55 PM #3
Baseball Bat ?
Is that as baseball bat ?
Is that to put the dent In or Take it out ?

Just kiddin', Good start.
Keep us posted on your progress !
............. Norm
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Spoolgun.
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
www.normsmobilewelding.blogspot.com
-
06-26-2010, 07:50 PM #4
Senior Member
- Join Date
- Feb 2007
- Location
- West Farmington, OH
- Posts
- 746
When I first started removing dents from cars an older wiser body man once told me. "Study the damage, figure out how it occurred, which part happened first and last. Start where the damage occurred last and work toward where it happened first and you'll save yourself a lot of aggravation and stretched metal."
I've always used this approach with great success. It doesn't matter if it's a little ding or scrape or if the core support is 6" away from the firewall.
Hope this helps.Blondie (Owner C & S Automotive)
Colt the original point & click interface!
Millermatic 35 with spot panel
Miller 340A/BP
Victor O/A torches
Lincoln SP125
Too many other tools to list
03 Ram 1500
78 GS1000
82 GL1100 Interstate
-
06-26-2010, 07:54 PM #5
i tell you what i do need,,,,, the stupid radio code for this honda
the radio number is U2420 L2537
hope someone here can get me it! LOL crosses fingersAnything you could do, I could do better.
I can do anything better than you!
Lockheed Martin
Armco Steel, Baltimore
USW local #3185
-
06-26-2010, 09:14 PM #6
Heck you could have worked that dent out without ever firing up the stud gun.....should have had complete access from the back side.once you pulled the tail light would have been easy and probably not much hammer dolly work ....Jim
Welding in Crete
Syncrowave 350 LX
Millermatic 252
Millermatic 180 w Spoolgun
Miller Gold Seal 155
Miller Elite welding helmet
JD2 Tubing bender with Hydraulic conversion
Evolution Raptor15" SteelDry Cut Saw
Hypertherm Powermax 30
Some really cool hammers BIG and small
-
06-27-2010, 01:20 AM #7
Senior Member
- Join Date
- Mar 2007
- Location
- Deltaville, VA
- Posts
- 2,241
Bondo.

Real bodymen use lead.
Syncrowave 250 DX Tigrunner
Dynasty 200 DX
Miller XMT 304 w/714D Feeder & Optima Control
Miller MM 251 w/Q300 & 30A SG
Hobart HH187
Dialarc 250 AC/DC
Hypertherm PM 600 & 1250
Wilton 7"x12" bandsaw
PC Dry Cut Saw, Dewalt Chop Saw
Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
Thermco and Smith (2) Gas Mixers
More grinders than hands
-
06-27-2010, 07:57 AM #8
Senior Member
- Join Date
- Feb 2007
- Location
- West Farmington, OH
- Posts
- 746
Blondie (Owner C & S Automotive)
Colt the original point & click interface!
Millermatic 35 with spot panel
Miller 340A/BP
Victor O/A torches
Lincoln SP125
Too many other tools to list
03 Ram 1500
78 GS1000
82 GL1100 Interstate
-
06-27-2010, 08:01 AM #9
Senior Member
- Join Date
- Feb 2007
- Location
- West Farmington, OH
- Posts
- 746
To get the radio code you will have to take the radio and the title to a Honda dealer (parts dept) and they can either look it up or call Honda and get it. The reason for all of this BS is to prevent theft. I had an Accord I had to do just that with. The part that ticked me off is when I pulled in the lot I hadn't even got out of my truck yet and they wanted to sell me a new car, then as I was leaving a different salesman (liar) tried the very same thing.
Blondie (Owner C & S Automotive)
Colt the original point & click interface!
Millermatic 35 with spot panel
Miller 340A/BP
Victor O/A torches
Lincoln SP125
Too many other tools to list
03 Ram 1500
78 GS1000
82 GL1100 Interstate
-
06-27-2010, 08:10 AM #10
yea,, i dont even want to deal with a dealership in the correct way, as im not the owner and i have no title,,, im hoping someone here may work for honda and could pm the code,,, so i dont need to do all that...
in the morning im going to call dealership parts counters and try to sweet talk the code from someone over the phone.
but im no good at sweet talking due to my abrasive personality.Anything you could do, I could do better.
I can do anything better than you!
Lockheed Martin
Armco Steel, Baltimore
USW local #3185



Reply With Quote








