this job come in today,,, its a dent
im going to fix it,
first i use a stud gun (it welds the sticks onto the panel) and start pulling the dent out.
next i take pictures and post them to the internet.
later i will use a hammer and dolly,, and start bondo and paint,, but we are not there yet.
Results 1 to 10 of 21
Thread: fixing a dent
06-26-2010, 05:18 PM #1
fixing a dentAnything you could do, I could do better.
I can do anything better than you!
Armco Steel, Baltimore
USW local #3185