All you need is a bandsaw, bender, welder and metal lathe and some scrap steel and you can fix about anything. My fav snow shovel broke the handle and i didn't want to drive across town to get another one. I would rather spend a little time in the shop than shoveling snow...Bob
Results 1 to 10 of 12
-
12-07-2007, 01:52 PM #1
You can fix about anything with the right toys!!!
Bob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
-
12-07-2007, 02:25 PM #2
Hahahahahaha!!! thats Great AA! I love the creativity that a little metal affords.
Oh , my compliments to the nice composition of your attached photograph.
Another job well done!
Hahahahahaha!!! Bye!Will it weld? I loooove electricity!
Miller 251/30A spool
Syncro200
Spectrum 625
O/A
Precix 5x10 CNC Router12"Z
Standard modern lathe
Cheap Chinese mill that does the trick... sort of...
horizontal 7x12 bandsaw
Roland XC540 PRO III
54" laminator
hammer and screwdriver (most used)
little dog
pooper scooper (2nd most used...)
-
12-07-2007, 02:44 PM #3
Trying to get the paint dry so its on the radiator. I would sure hate for the wife to get paint on her mittens
...Bob
Bob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
-
12-07-2007, 03:38 PM #4
do you like them miller gloves? how long do you get a set to last? i cant seem to get past a week or 2 on a pair (well, on my left hand) my trigger hand i am using the same glove for about 6 months now
-
12-07-2007, 04:21 PM #5
Bob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
-
12-07-2007, 04:58 PM #6
When you're welding something really hot, can you feel the glove shrink up on your fingers?? usually accompanied by the smell of burning leather...
Will it weld? I loooove electricity!
Miller 251/30A spool
Syncro200
Spectrum 625
O/A
Precix 5x10 CNC Router12"Z
Standard modern lathe
Cheap Chinese mill that does the trick... sort of...
horizontal 7x12 bandsaw
Roland XC540 PRO III
54" laminator
hammer and screwdriver (most used)
little dog
pooper scooper (2nd most used...)
-
12-08-2007, 06:39 AM #7
Senior Member
- Join Date
- Jun 2007
- Location
- arizona
- Posts
- 105
you don't wear a small do you? i'm left handed and i burn thru the right glove all the time. i tell my friend at praxair to find me someone who wears out the lefts and we'll swap extra gloves.
when i run out of new gloves, i start wearing a left on the right hand (takes just a little while to get it to conform to my hand), or i cut fingers off other gloves and slip them over the burned ones. gets me thru a few more days!
cat
-
12-08-2007, 08:54 AM #8
Ken
What else is there besides welding and riding. Besides that
Miller Thunderbolt XL 300/200 AC/DC
Hobart Handler 187
Dewalt Chop Saw
4" Air Grinder
Die Grinder
Rigid Drill Press
Kellogg 10hp Air Compressor
2009 FXDC
-
12-08-2007, 09:03 AM #9
Bob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
-
12-08-2007, 11:06 AM #10
Will it weld? I loooove electricity!
Miller 251/30A spool
Syncro200
Spectrum 625
O/A
Precix 5x10 CNC Router12"Z
Standard modern lathe
Cheap Chinese mill that does the trick... sort of...
horizontal 7x12 bandsaw
Roland XC540 PRO III
54" laminator
hammer and screwdriver (most used)
little dog
pooper scooper (2nd most used...)



Reply With Quote









