does anyone have plans for oxy/acet hose reel for welding rig
Results 1 to 6 of 6
Thread: oxt/acet hose reel
-
06-19-2010, 07:57 AM #1
Junior Member
- Join Date
- May 2010
- Posts
- 1
oxt/acet hose reel
-
06-21-2010, 10:34 PM #2
Senior Member
- Join Date
- May 2010
- Location
- Central CA
- Posts
- 711
If you build one make the inside dia. large, so you will make less turn to wind up the hose.
Good Luck,
BobEllis 3000 Band Saw
Trailblazer 302 Air Pak w/ Wireless Remote
8-RC
Dynasty 200 DX
XMT 350 MPa w/S-74 MPa Plus
Millermatic 211
Passport Plus
30A w/ WC-24
HF-251D-1
Select Lathe
Exact Mill
Spectrum 625 X-TREME
Cutmaster 152 FOR SALE 1/3 Phase
Kalamazoo Band Saw H9AW FOR SALE 3 Phase
SX60 Arc Station
FX30 Arc Station
8-Grinders
5-Victor O/A
4- Chop Saws
2-Drill Presses
Lincoln SA-200 Blue Tint Red Face '63
Lincoln SA-200 Red Face '68
Lincoln SA-200 Black Face '59
-
06-22-2010, 10:01 PM #3
Senior Member
- Join Date
- Nov 2007
- Location
- Saskatoon, Sask, Canada
- Posts
- 1,267
Do you see the word "Search" near the top of the page?
Originally Posted by cdw
There have been a few different posts on the subject so I'm sure you should find something to get you started.at home:
2012 325 Trailblazer EFI with Excel power
2007 302 Trailblazer with the Robin FOR SALE
2008 Suitcase 12RC
Spoolmatic 30A
WC-24
2009 Dynasty 200DX
2000 XMT 304
2008 Thermal Dynamics Cutmaster 52
Sold:MM130XP
Sold:MM 251
Sold:CST 280
at work:
Invision 350MP
Dynasty 350
Millermatic 350P
Retired:Shopmaster 300 with a HF-251
-
06-29-2010, 10:30 AM #4
Junior Member
- Join Date
- Jun 2010
- Posts
- 1
Cable reels
cdw,
I don't have plans, but here are some photos of some cable reels. possibly you can build yours from the photos. Since these are cable reels, you'll notice one is insulated from the stand.
http://billswelderrepair.com/parts-page.html
http://www.auctiva.com/hostedimages/...rmat=0&lgdin=1
-
06-29-2010, 06:12 PM #5
Senior Member
- Join Date
- Aug 2007
- Location
- arkansas
- Posts
- 781
i bought a hand crank air hose reel, put quick dis-connects on the ends, left about 10 foot attached to the bottles, then roll out what i need, connect and go..... unhook and roll it up.... simple and effective
-
06-29-2010, 08:12 PM #6
Senior Member
- Join Date
- Dec 2009
- Location
- Midwest
- Posts
- 581
I made one from a fire hose reel. I have a short length of hose to connect the reel to the tanks.
It's not the roll out while connected type, but it cost next to nothing & works quite well.
So you're telling me...You're not nostalgic? Then, give me another word for it......
Reply With Quote
