What sprayer do most of you use when spraying your finished product?
I have a Husky standard bottom spray gun, and two cheep CP harbor freight gravity fed spray guns, one 20 oz and one 4 oz detail.
Also what tip number do you use in your guns? My 20 oz has a 1.3 tip and I am planing on using it praying thinned rust-olium paint on my projects and clear coat on my horseshoe projects with the 4 oz gun.
I am converting both gravity fed guns to 3M PPS liner systems.
Thanks for any input.
Results 1 to 3 of 3
Thread: Painting finished product
06-10-2010, 07:59 AM #1
Painting finished productDon D.
Miller spectum 375 X-Treme Plasma
to many 4 1/2 grinders (not)
25 x 40 shop (dog house)
06-10-2010, 08:13 AM #2Senior Member
- Join Date
- Dec 2009
- Williams Lake, British Columbia
At the shop I use the conventionnal pot for big job and rattle cans for small jobs. The rattle cans companies makes some good products these days.
A good primer is yellow oxide, I have that primer on a a 10 years old motorcycle and there is not a spect of rust on it.
06-10-2010, 01:15 PM #3Senior Member
- Join Date
- Feb 2010
- Houston, Tx.
I use Sata and DeVilbiss HVLP guns, but that's just my preferences. I use whatever size needle and aircap that the finish manufacterer recommends in their data sheet for the product I'm spraying.