I own all my tanks, and they were all purchased secondhand. I have two O/A sets, shield bottles for my MIG and TIG setups, and I picked them up for less than half what they would cost new. Deals can be found if you are patient, especially on Craigslist.
Results 11 to 20 of 20
Thread: Oxy Acetalene bottles
-
12-06-2007, 02:57 PM #11
Junior Member
- Join Date
- Mar 2007
- Posts
- 15
-
12-06-2007, 03:18 PM #12
I bought my 336cf and my 80cf bottles new. The rest of them were all either acquired with machines or through good fortune (private sales or free).
Craigs list is a great place to look. I put up an add looking for free lp tanks and ended up with a 125cf O2 bottle.
Syncrowave 250DX
Invison 354MP
XR Control and 30A
Airco MED20 feeder
Thermal Dynamics Cutmaster 81
Smith O/A rig
And more machinery than you can shake a 7018 rod at
-
12-06-2007, 06:20 PM #13
-
12-06-2007, 06:39 PM #14
Junior Member
- Join Date
- May 2007
- Location
- Apache junction, AZ
- Posts
- 16
dont get the wrong impression. they had up to date tags from the local shop, and he is a buddy of mine so i checked through him and he said they were legit and he sold them to the guy i bought them from. its kind of sad that a guy would drop the price down so far on something he once worked so hard to pay for, just to get high for a night....
-
12-06-2007, 08:29 PM #15
Sometimes a person has to hit rock bottom and lose everything before they can see clear again. Don't give up on your friend yet.
Tim Beeker,
T-N-J Industries
(my side bussiness)
Miller Synchrowave 350LX with tigrunner
Esab 450i with wire feeder
HH135 mig
Thermal Dynamics cutmaster 51 plasma cutter
Miller aircrafter 330 - sold
Marathon 315mm coldsaw
vertical and horizontal band saws
table saw
Dewalt cut off saw
Sand blast cabinet
lots of hand grinders
Harris torch
beer fridge
-
12-06-2007, 08:30 PM #16
But I still hate a thief.
Tim Beeker,
T-N-J Industries
(my side bussiness)
Miller Synchrowave 350LX with tigrunner
Esab 450i with wire feeder
HH135 mig
Thermal Dynamics cutmaster 51 plasma cutter
Miller aircrafter 330 - sold
Marathon 315mm coldsaw
vertical and horizontal band saws
table saw
Dewalt cut off saw
Sand blast cabinet
lots of hand grinders
Harris torch
beer fridge
-
12-06-2007, 08:57 PM #17
One thing I learned a long time ago is that no matter how much you think you will never need them or tired of using them..... never, ever, ever sell off your tools. I've sold off bikes, electronics, even my house once when things got lean, but I have every tool I've ever bought, found, gifted to, passed down to, you name it. They are worth so much more than their market value in the long run. There's tools at my place that are twice my age and still going strong. That's why I hate theives, but there's a special burn that comes from someone stealing tools. It's someone's livelyhood and bread on the table. But, if it's legit and a good deal, then I'll be the first in line with cash and a flatbed trailer.
Just a side thought...
SSSLast edited by SkidSteerSteve; 12-06-2007 at 09:03 PM.
Bobcat 250, MM 210, Syncrowave 180, Spectrum 375
Cat 242B Skid Steer, Challenger (Cat/Agco) MT275
1 Thessalonians 4:11-12
-
12-06-2007, 09:04 PM #18
Member
- Join Date
- Oct 2007
- Location
- Vancouver, Washington
- Posts
- 51
Canada, I feel I may have overreacted. I apologize for accusing you of receiving stolen property. I jumped to a conclusion without enough information. Where I live we have a very bad problem with meth heads stealing anything they can get their hands on. Just the other day my job took me to a large recycling yard. I saw two men pull up with half an aluminum light pole on top of a Toyota Corolla, the yard gave them the money no questions asked. After all the metal I have had stolen that really made me mad. Cops don’t seem to care. Regardless, I was wrong to attack your post.
Glad you got some good equipment for a good price. 
Paul
-
12-06-2007, 09:12 PM #19
There's no ground straps on any of the power mains around here - all the wire has been stolen...
Heard that from the lineman who did my line drop and relocation on the house when I moved the main panel. Pretty sad.Syncrowave 250DX
Invison 354MP
XR Control and 30A
Airco MED20 feeder
Thermal Dynamics Cutmaster 81
Smith O/A rig
And more machinery than you can shake a 7018 rod at
-
12-06-2007, 09:23 PM #20
Junior Member
- Join Date
- May 2007
- Location
- Apache junction, AZ
- Posts
- 16
pthunberg, dont worry about it, i understand. Yeah i live in apache juntion Arizona. its the meth capital of the U.S. alot of theft, and as you said no questions asked.


Reply With Quote









