Fire Pit screen has seen better days so made a new one on Sunday.
Picked up a Slip roller from a friend for 200.00 and used it to roll the Expanded
Rolled the Flat stock with my other flat stock roller-
Results 1 to 2 of 2
Thread: out with the old
Hybrid View
-
06-02-2010, 09:01 AM #1
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,636
out with the old
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
06-04-2010, 04:37 PM #2
Senior Member
- Join Date
- Jul 2008
- Location
- Delhi, Ontario:
- Posts
- 1,950
Good Job Ed; Now you got me thinkin' !!!!!!!!
........... Norm
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Spoolgun.
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
www.normsmobilewelding.blogspot.com
Reply With Quote
