I was commissioned to make a 5 ft. tall corpus sculpture to hang at the parish of St. Marry Magdalene, Brighton MI. Design was created by me and my brother ( Noah Hornberger) have about 30hours into it so far.
Results 1 to 10 of 20
Thread: Corpus Sculpture
Hybrid View
-
05-26-2010, 07:52 PM #1
Senior Member
- Join Date
- Mar 2009
- Location
- Michigan
- Posts
- 137
Corpus Sculpture Complete! See Page 2 for finished pictures!
Last edited by jessehornberger; 08-03-2010 at 01:35 PM. Reason: Finished!
Miller Syncrowave 200
Miller Spectrum 875 Plasma Cutter
Miller Milermatic 135
Ridgid Drill Press
Ridgid Chop Saw
36" Metal Break
Harris Toarches
English Wheel
Ingersoll Rand, 18.1 cfm Compressor
30 gal. Sand Blaster
Planishing Hammer
150lb Anvil
10" Swing Logan Lathe
-
05-26-2010, 09:55 PM #2
Senior Member
- Join Date
- Oct 2009
- Posts
- 254
Looks awesome so far. Is it stainless or are you painting or powder coating it?
Miller syncrowave 200 runner with coolmate 4
and wp2025 weldcraft torch
Miller 125c plasma cutter
-
05-27-2010, 06:19 AM #3
Senior Member
- Join Date
- Mar 2009
- Location
- Michigan
- Posts
- 137
Steel
It is made out of 16 gauge hot rolled sheet metal and the linen cloth will be made out of copper. When it is finished I am going to spray it with a few coats of automotive clear coat.
Miller Syncrowave 200
Miller Spectrum 875 Plasma Cutter
Miller Milermatic 135
Ridgid Drill Press
Ridgid Chop Saw
36" Metal Break
Harris Toarches
English Wheel
Ingersoll Rand, 18.1 cfm Compressor
30 gal. Sand Blaster
Planishing Hammer
150lb Anvil
10" Swing Logan Lathe
-
05-27-2010, 05:08 PM #4
Senior Member
- Join Date
- Oct 2007
- Location
- Mt. Clemens, Michigan
- Posts
- 276
Looks good man. I think I met one of your former instructors in Ypsi a few weeks back, we were talking about sculptures and he mentioned a former student that was working on a piece for a church.
I like how you did the lay out.
-Josh
-
05-27-2010, 06:11 PM #5
Senior Member
- Join Date
- Mar 2010
- Posts
- 245
looks good, very interesting art
Anything you could do, I could do better.
I can do anything better than you!
Lockheed Martin
Armco Steel, Baltimore
USW local #3185
-
05-27-2010, 07:35 PM #6
Junior Member
- Join Date
- Dec 2008
- Posts
- 1
Looks awesome
Reply With Quote
