ok im just a shop rat that caan MIG,TIG,ARC pretty good but i need my ow equipment for side bisness (times are tough) but i have 1800 to spend and am wondering what i should get my truck can handle a bobcat or trailblazer if i could find one for a good price but are the MIG and TIG processes as good as the 212 or the diversion 165 (sync 250 is out of my budget)
so overall can anyone help me out here im stuck
also sorry stupid move i put his in the wrong forum set sorry again
mods please move to the appropriate forum
but does the bobcat and trailblazer come with cables when you buy them or no im not sure
Results 1 to 8 of 8
Thread: Buying a welder need advice
04-06-2010, 11:56 PM #1
Buying a welder need advice
Last edited by cncmachinist; 04-07-2010 at 12:24 AM.
04-07-2010, 04:54 AM #2Senior Member
- Join Date
- Feb 2010
- Houston, Tx.
Not to throw another wrench into your works; But how about an XMT 304? It will do stick, mig and flux core with an add on feeder, and tig. About the only thing it lacks is A/C output for aluminum tig work. With all of the feeders and high frequency boxes, etc. available for this machine, you can custom tailor it to your needs. Then there are always the Dynasty machines----( Insert Homer Simpson noises and drool! ).
04-07-2010, 05:28 AM #3
What kind of work will you be doing? Do you want to be portable or only weld at a shop or both? If shop based then what kind of electric power do you have available?MM250
Lincoln ac/dc 225
MM200 black face
Whitney 30 ton hydraulic punch
Lown 1/8x 36" power roller
Arco roto-phase model M
Vectrax 7x12 band saw
Miller spectrum 875
30a spoolgun w/wc-24
04-07-2010, 07:08 AM #4
The engine driven machines do not come with leads. It is sort of a mute point if you are considering new tho because they cost a good bit more than $1800
Used would be different tho and there is a very good chance of finding a good working machine ready to go with everything for that price.
Give your location and someone close could help as well.
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
04-07-2010, 06:28 PM #5
well thats a downer but ya i have 220 on a 50amp breaker in my shop/garage but a 304 would be great except i dont have 3 phase setup and then i would have to get a 22a for mig and wire feed
but if anyone in southern california has one there selling please contact me ive seen a few for sale but there either brand new or beat to **** and back
if you know of anyone selling a good used machine send me a message on the board or my cell 7142625119 thanks for your help
04-07-2010, 06:39 PM #6at home:
2012 325 Trailblazer EFI with Excel power
2007 302 Trailblazer with the Robin FOR SALE
2008 Suitcase 12RC
2009 Dynasty 200DX
2000 XMT 304
2008 Thermal Dynamics Cutmaster 52
Retired:Shopmaster 300 with a HF-251
04-08-2010, 12:54 AM #7
ok i think ill look more into a 304 but whats the cost of oh say 20' leads for the bobcat i dont need to go very far but 10' is too short do you have to custom wire the ground and all that
04-11-2010, 11:17 PM #8Senior Member
- Join Date
- Feb 2010
- Houston, Tx.
I bought the materials to make my leads on E-bay. I've got 25' of ground and 25' of work lead. The 50' of 2/0 cable was about $120.00 new, Tweco 300 amp ground clamp $30.00, Tweco 300 amp stinger $35.00, if I remembered correctly. Oh and two Dinse connectors $10.00. That's about $230.00 after shipping costs for 25' each of 2/0 leads.