Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 14

Hybrid View

  1. #1

    Default Ironworker Project Complete

    Now, here is a project. I admit it doesn't have a lot to do with welding, more like revitalization of an abused tool for use in welding. Look very closely to see how this guy was using it. It had no switches, you just plugged it in. All guards were removed, but we have all done that from time to time.

    This poor thing was really abused by a guy who built trailers for a living. His shop looked about the same. Fortunately for us all he went into real estate after that.

    Pix of before and after (I even got decals for it). Lots of hours went into it. I even painted it with their two part paint and was I surprised to find it was a wrinkle finish. It came out fine, but it was the first wrinkle finish I have ever done. I had bed liner sprayed on the lower part where it really gets beat up from metal dropping.






  2. #2
    Join Date
    Mar 2007
    Location
    Oahu, Hawaii
    Posts
    2,469

    Default

    What a beautiful job! How did you get all those scrathes off before paint?
    Flapdisks??
    I'm not late...
    I'm just on Hawaiian Time

  3. #3

    Default

    I ground them off. I got a good sanding primer and a few places I used "green stuff" body filler. I probably got a little **** about this project.

    Jim

  4. #4
    Join Date
    Mar 2007
    Location
    Oahu, Hawaii
    Posts
    2,469

    Default

    Just curious what you ground them off with.........
    again, AWSOME job!!!!!
    I'm not late...
    I'm just on Hawaiian Time

  5. #5

    Default

    Most of them just 7" and 4" angle grinders with grinding disks and then sanding disks with rubber back plates. I did use an orbital sander quite a bit later.

    The bottom metal shrouds were in pretty bad shape since they get hit by metal. I heated some of the spots with a torch and pounded them out. The black truck bed coating covered a multiple of sins and really quieted the thing down.

    One of the hardest things was getting the greasy residue off it. Nothing seemed to cut it very well. It would really plug up sanding disks. I can imagine the former owner's lungs must have looked the same. Had I to do it over again I would have stripped it to the frame and had it sand blasted.

    The two part paint provided by Scotchman was great. I also got a two part primer from an industrial paint supply. Basically it was down to metal pretty much everywhere before I started the priming.

    Scotchman was a great help with their diagrams and their consultation. When you get a machine like this that has been Jerry rigged like it had been you need help. Their online things are great. Some things had changed, however, like the electrical switch which I had to modify a bit.
    Jim

  6. #6
    Join Date
    Mar 2007
    Location
    Oahu, Hawaii
    Posts
    2,469

    Default

    Thanks Jim! Kudos to all the hard work you put into it!! Apparently it paid off! I heard it cost about $200 or so to sharpen a set of blades for that thing. That true with you??
    I'm not late...
    I'm just on Hawaiian Time

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.